Lexmark 120n - E B/W Laser Printer Manual de consulta rápida - Página 3
Navegue en línea o descargue pdf Manual de consulta rápida para Impresora Lexmark 120n - E B/W Laser Printer. Lexmark 120n - E B/W Laser Printer 12 páginas. Information update
También para Lexmark 120n - E B/W Laser Printer: Configuración e instalación (2 páginas), Manual de instalación (2 páginas), Referencia rápida (13 páginas), Actualización (1 páginas)
Imprimir página
Primary
Secondary
light
light
sequence
sequence
Printing the menu settings and network setup page
To print the menu settings and network setup pages, press
automatically prints the menu settings and network setup pages.
A list of the printer settings and the current default values are printed on the menu settings page. The
current default settings are marked with an asterisk. The network setup page confirms the network
Status is "Connected" and lists the current network settings.
Restoring factory defaults
This function will return most of the settings back to their factory values. The display language and
the settings in the Network and USB menus are not returned to the factory defaults.
To restore the printer to the original factory defaults, press and hold
seconds.
Note: Before restoring the factory defaults, make sure the host computer or network has
stopped sending information to the printer.
Message
Memory full (Ready / Data light blinks three times)
Host interface disabled (Ready / Data light blinks five times)
Jam in the printer paper path (Ready / Data light blinks ten times)
Jam in Tray 1 / priority feeder (Ready / Data light blinks four times)
Short paper (Ready / Data light blinks three times)
Toner low (Ready / Data light blinks eight times)
Replace long-life photoconductor kit (Ready / Data light blinks once)
Service error (Ready / Data light blinks ten times)
Printing the menu settings and network setup page
from the Ready state. The printer
3
for more than three