Avanti WD363P Manual de instrucciones - Página 10
Navegue en línea o descargue pdf Manual de instrucciones para Dispensador de agua Avanti WD363P. Avanti WD363P 20 páginas. Avanti products water dispenser user manual
Imprimir página Steps to replace water bottles
•
Use a clean cloth to wipe off neck of bottle.
•
Remove cap.
•
Carefully lift bottle (approx. 40 lbs.) using your legs and not your back. Do not place hands on
opening of bottle while placing in reservoir.
•
Insert the water bottle on the water intake over reservoir opening so it settles properly on it.
•
Wipe off any water which may have splashed on dispenser top.
•
When a new bottle is installed you must open the hot water faucet and remove no less than 4 full
cups of water to insure the water flows properly and the water reservoir is at the proper level.
Cold Water Control
Turn the cooling switch on. The green indicator will be lit on and the process begins. When the water
reaches the right temperature the green light goes off automatically.
Hot Water Control
Turn the heating switch on, the red indicator will be lit on and the heating process starts. When the
water reaches the right temperature the red light goes off automatically. When the temperature goes
down to approx. 80º C (176º F), the red indicator will glow again and another heating process starts.
NOTE:
THE HOT WATER FAUCET HAS A CHILD-SAFETY GUARD ATTACHMENT.
To dispense hot water:
♦ Slide red safety button to the left and hold while pressing downward on hot water faucet to
dispense hot water.
♦ Safety button will return to its original position when faucet is released.
Cup Dispenser (Optional)
A cup dispenser may be installed by using the mounting holes (covered with plastic caps) located near
the top of the right side panel of the cooler. The cup dispenser comes equipped with a mounting
bracket and screws and may be ordered by completing the enclosed order form provided with your
instruction manual.
OPERATING YOUR WATER DISPENSER
10