Avanti IM20SS Manual de instrucciones - Página 9

Navegue en línea o descargue pdf Manual de instrucciones para Fabricador de hielo Avanti IM20SS. Avanti IM20SS 17 páginas. Avanti products ice maker

POWER FAILURE

MOST POWER FAILURES ARE CORRECTED WITHIN A FEW HOURS AND SHOULD NOT AFFECT

THE TEMPERATURE OF YOUR ICE MAKER IF YOU MINIMIZE THE NUMBER OF TIMES THE DOOR

IS OPENED. IF THE POWER IS GOING TO BE OFF FOR A LONGER PERIOD OF TIME, YOU NEED

TO TAKE THE PROPER STEPS TO DISCONNECT YOUR APPLIANCE.

1. SHUT OFF WATER SUPPLY AT THE MAIN WATER VALVE.

2. DISCONNECT THE WATER SUPPLY LINE FROM VALVE.

3. ALLOW UNIT TO RUN FOR AN HOUR OR TWO UNTIL ALL REMAINING ICE CUBES HAVE BEEN

EJECTED.

4. DISCONNECT UNIT FROM MAIN POWER SOURCE.

5. DRY OUT EXCESS WATER FROM ICE MAKER ASSEMBLY

6. LEAVE THE DOOR OPEN AT LEAST TWO INCHES.

SECURELY TAPE DOWN ALL LOOSE ITEMS INSIDE YOUR ICE MAKER.

TURN THE LEVELING SCREWS UP TO THE BASE TO AVOID DAMAGE.

TAPE THE DOOR SHUT.

BE SURE THE ICE MAKER STAYS IN THE UPRIGHT POSITION DURING TRANSPORTATION.

THE ICE MAKER SHOULD BE LOCATED IN THE COOLEST AREA OF THE ROOM, AWAY FROM

HEAT PRODUCING APPLIANCES OR HEATING DUCTS, AND OUT OF THE DIRECT

SUNLIGHT.