Lexmark 2200 Series Configurar - Página 9
Navegue en línea o descargue pdf Configurar para Impresora Lexmark 2200 Series. Lexmark 2200 Series 11 páginas. Lexmark 2200: document
También para Lexmark 2200 Series: Manual de inicio rápido (2 páginas), Manual de instalación (2 páginas)
Imprimir página
Understanding error codes on the display
When your control panel displays blinking numbers, see the table to correct the
problem.
Error code
What you should do
1 Load paper.
02
Paper Out
2 Press Power to feed paper and resume printing.
1 Press Power.
03
Paper Jam
2 Lift the scanner unit until the scanner support keeps it
3 Pull gently to remove the paper jam.
4 Close the scanner unit.
5 Press Power.
6 Print your document again.
1 Press Power.
04-05
Carrier Stall
2 Open the scanner unit.
3 Make sure nothing is blocking the paper or print cartridge
4 Close the scanner unit.
5 Press Power.
6 Print your document again.
If this does not correct your problem, contact Lexmark
Customer Support.
Contact Lexmark Customer Support.
06-14
Copying without a computer
1
Open the scanner lid of the All-In-One.
2
Place the item you want to copy face down on the glass, and then close the
scanner lid.
3
Press Copy Quantity repeatedly until the number of copies (1-9) you want
to make appears on the display.
4
Press Black Copy or Color Copy to copy using Normal quality.
Note: To copy using Best quality, press and hold Black Copy or
open.
path.
Color Copy for at least two seconds.
9