AVANTO 177IC1800P Manual del usuario - Página 9

Navegue en línea o descargue pdf Manual del usuario para Gamas AVANTO 177IC1800P. AVANTO 177IC1800P 11 páginas. 1800 watt countertop induction range with probe cooking

Imprimir página

• Before plugging in always place suitable cookware filled with food centered onto the induction cooking range.

Otherwise error function will occur (see "Safety function").

• Insert the plug into a suitable socket, a long acoustic signal sounds. The display will show --- .

• Pushing the knob will switch the device into Standby Mode. The display will show 000 and a short acoustic

signal will sound (whenever you press button again or new button, a short acoustic signal sounds).

• Pressing the "HEAT/HOLD" button will turn the fan inside on automatically. The display now shows 6, this is

an automatic setting. The appliance is now in the power mode. Select the desired power higher or lower by

rotating the knob.

• Press the "Heat/Hold" button to program the temperature mode. Select the desired temperature higher or

lower by rotating the knob.

• If desired, press the "timer" button to program the cooking time. Adjust the desired cooking time by turning the

knob. The time is adjustable from 0 – 180 minutes (1 minute steps). This is an optional timer. If you do not set

the timer, it will default to 180 minutes and then shutoff for safety reasons.

• Press " Probe", and the unit will enter the Probe mode. The Default Temperature will flash on the Screen

("200F"), select the target temperature of the probe by turning the knob. The temperature will flash for 3

seconds after the target temperature of the probe is selected. Touch the "Heat/Hold" to select the Power; the

Default power will flash on the screen ("15"). Then select the heating power of the probe by turning the knob.

The power will flash for 3 seconds after the heating power for heating is selected. The display will cycle back

and forth between the heating power and the selected temperature during the probe mode.

Cooking time will be indicated at the display by counting down the minutes. When cooking time is finished this

will be indicated by several acoustic signals and the unit will continue to work because the timer is just an audible

timer and does not control the cooking process. After cooking or warming process is finished, always switch the

device off and unplug. All functions can be adjusted manually by pressing the corresponding buttons.

Do not use the appliance if it shows any sign of damage or malfunction, please contact customer service. Do not

place empty cookware on the appliance and do not leave cookware on the appliance for too long to avoid liquid

from cooking off completely. Overheating the cookware will activate the boil dry protection of the device.

The cooling fan will continue to run for 10 minutes after the unit is turned OFF. Do not restrict airflow

to cooling fans.

This unit will automatically shut OFF after 10 continuous hours of use as a built-in safety feature.

You may turn it back ON and continue using it. We recommend only using it for 2-3 hours continuously

at one time to lengthen the life of your unit.

All models are equipped with an "overheating protection" feature. If the temperature of the cooking

surface becomes too hot, the unit will turn off. All models are equipped with a pan detection system

and a 'Safety Off' feature so that when cookware is removed, the unit is switched to Standby Mode until

a pot or pan is placed back on the hob. See below for full list of Error Codes.

www.AvantcoEquipment.com

User Manual