HIKVISION HiLook Series Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para DVR HIKVISION HiLook Series. HIKVISION HiLook Series 18 páginas. Smart hybrid light bullet & turret camera
También para HIKVISION HiLook Series: Manual de inicio rápido (18 páginas), Manual del usuario (14 páginas), Manual del usuario (20 páginas), Manual del usuario (18 páginas), Manual del usuario (13 páginas), Manual del usuario (17 páginas)

Imprimir página
HIKVISION HiLook Series Manual del usuario
1.2.2 Overview of Type II Camera
Trim Ring
Enclosure
Main Body
Mounting
Base
Figure 1-2 Overview of Type II Camera
Note:
Press and hold the switch button for 5 seconds to
switch the video output. Four kinds of video outputs
are available: TVI, AHD, CVI, and CVBS.

2 Installation

Before you start
Make sure that the device in the package is in good
condition and all the assembly parts are included.
Make sure that all the related equipment is power-off
during the installation.
Check the specification of the products for the
installation environment.
Check whether the power supply is matched with
your power output to avoid damage.
Make sure the wall is strong enough to withstand
three times the weight of the camera and the mount.
If the product does not function properly, contact
your dealer or the nearest service center. Do NOT
disassemble the camera for repair or maintenance by
yourself.
2.1
Installation of Type I Camera
2.1.1 Ceiling Mounting without Junction Box
Steps:
1. Paste the drill template (supplied) to the place
where you want to install the camera.
2. (Optional) For cement ceiling, drill the screw holes
with a 5.5 mm drill and insert the supplied wall
plugs.
3. Loosen the screw and pull out the clip plate to
dissemble the camera.
Microphone
Figure 2-1 Drill Template
Switch Button
Power Cord
IN
DC12V
Audio & Video Cable