HIKVISION HiLook Series Manual del usuario - Página 7

Navegue en línea o descargue pdf Manual del usuario para DVR HIKVISION HiLook Series. HIKVISION HiLook Series 13 páginas. Smart hybrid light bullet & turret camera
También para HIKVISION HiLook Series: Manual de inicio rápido (18 páginas), Manual del usuario (18 páginas), Manual del usuario (14 páginas), Manual del usuario (20 páginas), Manual del usuario (18 páginas), Manual del usuario (17 páginas)

Figure 2-7 Fix the Junction Box Cover on Its

Repeat steps 6 to 7 of 2.1.1 Ceiling/Wall Mounting

without Junction Box to finish the installation.

2.2 Installation of Type II Camera

2.2.1 Ceiling/Wall Mounting without Junction Box

Before you start:

The ceiling mounting and wall mounting are similar.

Following steps take ceiling mounting as an example.

Steps:

1. Paste the drill template (supplied) to the place

where you want to install the camera.

2. (Optional) For cement ceiling, drill the screw holes

with a 5.5 mm drill and insert the supplied wall

plugs.

Cable

Hole

3. (Optional) Drill the cable hole, when the cables are

routed through the ceiling.

4. Align the screw holes in the bracket to the ceiling,

and secure the camera with three PA4 × 25 screws

(supplied).

Figure 2-9 Secure the Camera to the Ceiling

5. Connect the power cord and video cable.

6. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the camera according to the figure

below.

Scre w Hole

Side Opening

Figure 2-8 Drill Template

Body

Scre w Hole

tem pl ate