HIKVISION HiWatch Series Manual del usuario - Página 9

Navegue en línea o descargue pdf Manual del usuario para DVR HIKVISION HiWatch Series. HIKVISION HiWatch Series 15 páginas. Hd turret and bullet camera
También para HIKVISION HiWatch Series: Manual de inicio rápido (15 páginas), Manual de inicio rápido (20 páginas), Manual de inicio rápido (18 páginas), Cómo hacerlo (4 páginas), Manual del usuario (15 páginas)

8. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the camera according to the figure below

to get an optimum angle.

Tilt Position

[0° to 75°]

1). Rotate the enclosure to adjust the pan position

[0° to 360°].

2). Move the camera body up and down to adjust

the tilt position [0° to 75°].

3). Rotate the camera body to adjust the rotation

position [0° to 360°].

2.3 Installation of Type III and Type IV Camera

Before you start:

Type III and Type IV cameras share the same installation,

and we take Type IV camera as the example to describe

the installation method.

Both wall mounting and ceiling mounting are suitable

for the camera. Ceiling mounting will be taken as an

example in this section. You can take the steps of ceiling

mounting as a reference, when adopting wall mounting.

Steps:

1. Paste the drill template (supplied) to the place

where you want to install the camera.

2. Drill the screw holes and the cable hole (optional) in

the ceiling according to the drill template.

Note:

Drill the cable hole, when adopting the ceiling outlet

to route the cable.

3. Attach the bracket to the ceiling and secure the

camera with supplied screws.

Pan Position

[0° to 360°]

Figure 2-10 3-axis Adjustment

Figure 2-11 Drill Template

Rotation Position

[0° to 360°]