GARDEN MASTER GM1818 Manual de instrucciones de montaje - Página 7
Navegue en línea o descargue pdf Manual de instrucciones de montaje para Almacenamiento exterior GARDEN MASTER GM1818. GARDEN MASTER GM1818 8 páginas. Sloping roof shed
También para GARDEN MASTER GM1818: Instrucciones de montaje (2 páginas), Manual de instrucciones de montaje (8 páginas)
Imprimir página
STEP 7:
COMPLETE YOUR SHED
RECESSED CONCRETE FLOOR PLAN FOR SPECIALLY
POURED CONCRETE FLOORS:
Every shed must have some type of foundation between it and the ground. You can pour a concrete floor and use recessed floor
clamps, use an existing concrete base with flat floor clamps or purchase a kitset wooden floor from your local shed dealer.
20MM - 25MM
SHED
RECESS
25MM
25MM
APPROX
20MM - 25MM
BOXING DIAGRAM
INTERNAL DIMENSIONS
RECESSED FLOOR CLAMPS
For poured floors with a
recess around the perimeter.
Available from your local
shed dealer.
KITSET WOODEN FLOORS
Every shed must have a floor. These are available from your local shed dealer.
For more information visit www.gardenmastersheds.co.nz
SPECIFICATIONS
8MM BOLT SET INTO CONCRETE
100MM
20MM - 25MM
(1 ' X 1 ')
If you need advice, call us
INTERNAL
MEASUREMENT
INTERNAL DIMENSIONS FOR THE GM1818
1785MM X 1785MM
FLAT FLOOR CLAMPS
For existing concrete only.
Water can seep underneath.
Available from your local
shed dealer.
FREE
on
0800 807 433
or email us at [email protected]
If you choose to vary from these instructions your warranty will be impaired.
APPROX 25MM RECESS
AROUND THE OUTSIDE
1785MM
1785MM
FLOOR BOARD
GARDEN MASTER TIP
For extra protection in high wind areas
put additional nails through the wall
channels into the floor boards and also
peg the shed bearers to the ground.
25MM
SHED
RUNNER
7