Lexmark 25C0350 - C 734n Color Laser Printer Imprimir manual

Navegue en línea o descargue pdf Imprimir manual para Impresora Lexmark 25C0350 - C 734n Color Laser Printer. Lexmark 25C0350 - C 734n Color Laser Printer 9 páginas. Information guide
También para Lexmark 25C0350 - C 734n Color Laser Printer: Manual de instalación del módulo de bandeja (1 páginas), Manual de instalación del módulo de bandeja (2 páginas), Referencia rápida (2 páginas), Manual de conexión (5 páginas), Manual de impresión (3 páginas), Instalación (2 páginas), Manual de información (1 páginas)

Imprimir página
Lexmark 25C0350 - C 734n Color Laser Printer Imprimir manual
Print quality guide
Many print quality problems can be solved by replacing a supply or maintenance item that is approaching the end of its
intended life. Check the printer control panel for a message about a printer supply.
Use the following table to find solutions to print quality problems:

Isolating print quality problems

To help isolate print quality problems, print the print quality test pages:
1
Make sure paper is loaded in Tray 1.
2
Turn the printer off.
3
From the printer control panel, press and hold
4
Release both buttons when the clock appears, and wait for Config Menu to appear.
5
Press the down arrow button until
The print quality test pages print.
6
Press the down arrow button until
Resetting the Printer appears briefly, followed by a clock, and then Ready appears.

Print irregularities

Example
Cause
Paper has absorbed moisture due to high humidity.
You are using paper that does not meet the printer
ABCDE
specifications.
)
)
ABCDE
A toner cartridge, the transfer module, or the fuser is worn
ABCDE
or defective.
and the right arrow button while turning the printer on.
Prt Quality Pgs appears, and then press
Exit Config Menu appears, and then press
Print quality guide
Page 1 of 8
.
.
Solution
Load paper from a fresh package into the paper tray.
Make sure that the Paper Type and Paper Weight
settings match the type of paper that you are using.
Avoid textured paper with rough finishes.
Replace the print cartridge, the transfer module, or
the fuser.