Avantree BTTC-418-P Manual del usuario - Página 3

Navegue en línea o descargue pdf Manual del usuario para Transmisor Avantree BTTC-418-P. Avantree BTTC-418-P 8 páginas. Bluetooth transmitter

Imprimir página

Pair and connect to Bluetooth headphones

Powering up the transmitter

Power up the transmitter using the USB cable provided. Connect it to either TV USB port (TV must be

ON to provide power) or a 5V/500mA-2A rated USB charger (e.g. your phone charger should work.)

Then slide the ON/OFF switch to ON. All LED lights will light up for 2 seconds upon powering on.

Enter the transmitter into PAIRING MODE

For rst time use, the transmitter will enter pairing mode automatically, the next to

RED

and

BLUE

alternately. For non- rst-time use, press and hold

mode.

Enter your headphones/speakers into PAIRING MODE

Please refer to relevant user manual (Usually LED on headphone ash

BLUE

ash

quickly)

Connecting

During the pairing process, keep the devices close to each other and wait. Once connected, the

will turn SOLID BLUE.

next to

Reconnect

NO need to manually reconnect the transmitter to your device before each use. The transmitter will

automatically reconnect to the last connected device within 5-10 seconds after both devices had been

powered on. Alternatively, reboot the transmitter and wait 5 -10 seconds for them to reconnect.

If the next to A on the transmitter turn solid BLUE, it con rms that the connection between the

transmitter and headphones is working normally. The next step is to feed the audio from your TV into

the transmitter.

After you've connected the transmitter to your TV/audio while following the steps shown in the

sections below, if you still cannot hear anything through your headphones, please either adjust your

TV audio output setting as suggested or contact your TV manufacturer for support.

Use with your TV

Check your TV output options before the set up

Jack

Options

Natively

Supported?

Optical

AUX/3.5mm

OUT

for 1 second to enter pairing

RED

BLUE

and

RCA jacks

Other RCA

labeled

jacks (usually

"AUDIO OUT"

audio IN)

will ash

alternately or