Avantree AS9P Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Auriculares Avantree AS9P. Avantree AS9P 6 páginas.

about 2 times and then the headset will turn off automatically. Now your Audition Pro has been restored

to its default settings. After powered on again, it will enter pairing mode directly.

5. LED indications:

Working mode

SBC codec

AAC codec

aptX codec

aptX Low Latency codec

Note: aptX Low Latency is supported when the headphones are paired with a transmitter that also

supports aptX Low Latency. This can be verified by the LED indications.

When the LED blinks red, you should recharge your headphones. Remove the Micro USB port protector

and charge the headphones via the supplied Micro USB cable. It normally takes about 3 hours to fully

charge the battery. The LED will stay red when charging and will turn off when charging is complete.

Charging requirement: You can plug our supplied Micro USB cable to your own USB chargers (wall

charger/travel charger/car charger, etc) with 5V/500mA-2A or to a PC / Mac USB port. It is OK to use

most mobile phone chargers on the market.

Bluetooth version: 4.0

Supported profiles: HFP (Headset), HFP (Hands-Free), A2DP, AVRCP

Supported audio codecs: SBC, AAC, aptX, aptX Low Latency

Operational range: Class 2, 10 meters (33 feet)

Driver Diameter: 40mm

Headphones LED indicator

LED flashes BLUE once every 7 seconds

LED flashes BLUE twice quickly every 7 seconds

LED flashes GREEN once every 7 seconds

LED flashes GREEN twice every 7 seconds