Empire OP36FB2MF-4 Instrucciones de instalación y manual del usuario - Página 13
Navegue en línea o descargue pdf Instrucciones de instalación y manual del usuario para Chimenea de interior Empire OP36FB2MF-4. Empire OP36FB2MF-4 16 páginas.
Imprimir página
The firebox is designed to accept a gas line for an ANSI approved
burner. Have the gas line installed by a qualified service person in
accordance with all building codes. Consult local building codes
to properly size the gas supply line leading to the hook-up at the
installed burner. The Commonwealth of Massachusetts requires
that a flexible gas connector cannot exceed three feet in length.
Gas access holes are provided on both sides of the firebox. See
Figure 12. Carefully remove the knockout in the refractory brick
panel using a large standard screwdriver and hammer. First, place
screwdriver in groove next to plug and pry sideways to pop out
main plug. Then remove the remaining concrete in hole with gentle
tapping with ball peen hammer and/or screwdriver. A masonry drill
and bit may also be used to create a clean hole for the gas line to
pass through. See Figure 13.
After the brick panel knockout is removed, the firebox wrap will
have a round metal knockout that must be removed also. Use a
screwdriver to punch out the metal knockout.
Connection directly to an unregulated propane supply can
cause an explosion.
Vacuum or brush the control compartment at least twice a year.
Follow the maintenance instructions provided with the burner.
44373-0-0522
GAS LINE CONNECTION
WARNING
Figure 12
MAINTENANCE
NOTE: Use caution when removing the brick panel knockouts to
avoid damaging the brick panel.
Figure 13
Page 13