Jancy Engineering Slugger 2x2 17980 Manual del usuario - Página 5
Navegue en línea o descargue pdf Manual del usuario para Taladro Jancy Engineering Slugger 2x2 17980. Jancy Engineering Slugger 2x2 17980 16 páginas. Slugger portable magnetic drilling machine
Imprimir página1. If you require an additional manual, please contact Jancy Engineering at (563) 391-1300 for a fREE copy.
2. Never place hands, fingers, gloves or clothing near cutting area or rotating machine parts.
3. Always disconnect machine from power source before changing cutters, clearing chips, refilling lubricant or
performing adjustments.
4. Keep all safety features functioning and working properly.
5. Never wear loose clothing, gloves or jewelry when working near cutting area or rotating machine parts.
6. Always use eye and hearing protection.
7. Always use safety strap and chip guard provided with machine.
8. Always use proper tooling. Keep cutters securely fastened.
9. Do not use dull or broken cutters.
10. Do not use Slugger drilling machines on surfaces or materials being welded. Doing so can damage the
machine's electrical components.
11. Beware of slugs ejected at end of cut. They become HOT during the cut.
12. Magnet will not hold properly on thin materials or rough and dirty surfaces.
13. Keep bottom of magnet burr free and clear of chips and debris.
14. To reduce the risk of electrical shock, do not use machine in wet or damp areas.
15. Do not remove or alter electrical panels. Use only authorized service centers for repairs.
16. Motor will not start on non-ferrous materials.
special instructions
WARNING!
/
do not operate machine if warning and
contact jancy engineering for replacement labels
or instruction labels are missing or damaged
.
.
5