Airgineers 3S Class Reglas - Página 3

Navegue en línea o descargue pdf Reglas para Drones Airgineers 3S Class. Airgineers 3S Class 6 páginas.

D5. The maximum length and width dimension of 250mm is taken diagonally between the centres of a front and rear

motor and does not include propellers. There is no maximum height.

D6. Propellers must not exceed 5" (127mm) diameter

a. Propellers must be plastic

b. There is no limit to the number of blades that each propeller can have

c. There are no restrictions on the pitch of the propeller

D7. Only one Drone design may be used by a team at any given Event and must be used for all types of Races.

a. It is expected that damage may be sustained throughout the course of an event so any parts including

Frames, Propellers, Motors, Flight Controllers, Cameras, VTX etc. May be changed or replaced. However,

these must be identical to these with which the Drone passed Inspection.

D8. All Drones must be able to be Disarmed via a single switch on the Transmitter. This switch must be clearly

identiﬁ ed with a red marker such as heat-shrink tubing or red PVC tape tightly wrapped to the switch actuator

D9. Drones must be ﬁ tted with a failsafe that cuts power to all motors in the event of loss oﬀ signal between the

Transmitter and the Drone