Jands FP12 Manual de instrucciones - Página 5
Navegue en línea o descargue pdf Manual de instrucciones para Regulador de intensidad Jands FP12. Jands FP12 20 páginas. 12 channel, 2.4kva per channel (10a/240v) dimmer rack
Imprimir páginaIntroduction
1.0 Introduction
The JANDS FP12 is a high quality, rugged, 12 channel, 2.4kVA per channel (10A/240V)
dimmer rack specifically designed for demanding touring and theatre applications.
The FP12 can be powered from three-phase or single-phase mains supplies. The FP12
features
thermal/magnetic circuit breakers. The FP12 uses microprocessor-based digital control
for accurate dimming and in-built test functions. Digital control is via standard DMX-512
protocol.
The FP12 features toroidal output chokes. These chokes provide excellent high
frequency noise suppression and, together with the temperature-controlled fan, low
acoustic noise.
Control signal to the dimmer is via a standard DMX-512 socket at the front panel, while
the dimmed outlets and three phase power entry are located on the rear panel.
Features
• 12 x 2.4KW dimming channels
• DMX-512 digital control protocol
• DMX terminating switch
• Suitable for both touring and permanent installations
• Soft turn on characteristic
• Low acoustic/electrical noise
• Toroidal output chokes
• Circuit breaker protection of output devices
• Three mains phase indicator LEDs
• Built in test facilities
• Dimmer curve set for linear relationship between the control input and output power
• Compensates for fluctuations in the mains supply voltage, and filters superimposed
mains control tones, ensuring a constant light output and increased lamp life
• Rack mounted (3 rack units)
• Microprocessor control
• Temperature-controlled cooling fan
• Temperature monitor and thermal cut-out
• Dimmer will hold last DMX value should control data be interrupted
• 50/60Hz operation
• CE and C-Tick approved
Revision 0.1 – 3 June 1999
opto-controlled
Triacs
and
medium risetime
FP12 DIMMER
1-1
chokes
protected
USER MANUAL
by