Lexmark 560n - X Color Laser Manual de solución de problemas - Página 9
Navegue en línea o descargue pdf Manual de solución de problemas para Impresora Lexmark 560n - X Color Laser. Lexmark 560n - X Color Laser 10 páginas. Setup sheet
También para Lexmark 560n - X Color Laser: Manual (13 páginas), Hoja de configuración (2 páginas)
Imprimir página
Clipped images
These are possible solutions. Try one or more of the following:
C
HECK THE PAPER GUIDES
Move the guides in the tray to the correct positions for the
paper size loaded.
M
P
T
AKE SURE THE
APER
YPE SETTING
MATCHES THE PAPER LOADED IN THE TRAY
From Print Properties, change the Paper Type setting to match
the paper loaded in the tray.
C
P
S
HECK THE
APER
IZE SETTING
Make sure the Paper Size setting matches the paper loaded in
the tray.
Solid color pages
These are possible solutions. Try one or more of the following:
I
S A TONER CARTRIDGE DEFECTIVE
Replace the toner cartridge.
D
OES THE PRINTER NEED TO BE SERVICED
Contact Customer Support.
Paper curl
These are possible solutions. Try one or more of the following:
M
AKE SURE THE
MATCHES THE PAPER LOADED IN THE TRAY
From Print Properties, change the Paper Type setting to match
the paper loaded in the tray.
H
AS THE PAPER ABSORBED MOISTURE DUE TO
HIGH HUMIDITY
•
Load paper from a fresh package.
•
Store paper in its original wrapper until you are ready to use
it.
Toner specks
These are possible solutions. Try one or more of the following:
I
S THE TONER LOW
When Replace <color> Print Cartridge Soon
appears or when the print becomes faded, you may be able to
extend the life of the print cartridge:
1
Remove the specified print cartridge.
2
Firmly shake the cartridge side-to-side and front-to-back
several times to redistribute toner.
3
Reinsert the print cartridge and continue printing.
I
S THE TRANSFER BELT DEFECTIVE OR WORN
?
Replace the transfer belt.
I
S THE FUSER DEFECTIVE OR WORN
?
Replace the fuser.
I
S THERE TONER IN THE PAPER PATH
If there is excess toner in the paper path, contact Customer
Support.
P
T
APER
YPE SETTING
?
?
?
?
?
9
Toner rubs off
These are possible solutions. Try one or more of the following:
C
P
T
HECK THE
APER
YPE SETTING
From Print Properties, change the Paper Type setting to match
the paper loaded in the tray.
I
S THE FUSER DEFECTIVE OR WORN
Replace the fuser.
?