Empire BF-30-1 Instrucciones de instalación y manual del usuario - Página 9
Navegue en línea o descargue pdf Instrucciones de instalación y manual del usuario para Calentador Empire BF-30-1. Empire BF-30-1 12 páginas.
Imprimir página
TROUBLESHOOTING INFORMATION FOR QUALIFIED SERVICE PERSON
1. Spark electrode does not produce spark.
a. Spark electrode broken - replace.
b. Ignitor wire may not be attached to spark electrode - attach.
c. Ignitor wire damaged - replace.
d. Piezo ignitor defective - replace.
2. Spark electrode produces spark but pilot does not light.
a. No gas to heater - turn on gas.
b. PILOT position not properly aligned - turn gas control knob
to PILOT position and depress.
c. Pilot is blocked from spider web or dirt - clean pilot, see Page 7.
3. Pilot flame does not stay "ON" when control knob is released.
a. Control knob in PILOT position not completely depressed or
held in long enough.
b. INTERLOCK latching device is operative - see "Lighting
Instructions," Page 8, Step 9.
c. Thermocouple lead not tightened into gas control - tighten
thermocouple lead.
PLEASE NOTE: When ordering parts, it is very important that part number and description of part coincide.
INDEX
PART
NO.
NO.
1
10812
1
10811
2
SR-090
2
SR-041
3
R-2313
4
R-5008
5
SR-008
6
R-1992
7
SR-076
7
SR-017
8
SR-077
8
SR-018
9
SR-075
9
SR-016
10
10420
10
10478
11
10417
11
10475
12
10467
12
10479
13
R-4979
13
R-4980
14
R-4993
14
R-4994
15
R-5100
15
R-5098
16
10753
17
10462
17
10484
18
SR-214
19
R-2423
20
R-2351
20
10537
20
10538
USE ONLY MANUFACTURER'S REPLACEMENT PARTS. USE OF ANY OTHER PARTS COULD CAUSE INJURY OR DEATH.
R-4973
SYMPTOMS - POSSIBLE CAUSES AND CORRECTIONS
DESCRIPTION
CASING SIDE ASSEMBLY - LEFT
(BF-10)
CASING SIDE ASSEMBLY - LEFT
(BF-20, BF-30)
CASING BACK ASSEMBLY (BF-10
BF-20)
CASING BACK ASSEMBLY(BF-30)
PIEZO IGNITOR
IGNITOR WIRE
CASING SIDE ASSEMBLY - RIGHT
BULB CLIP
CASING LOUVER-TOP (BF-10 BF-20)
CASING LOUVER-TOP (BF-30)
HEAT SHIELD (BF-10 BF-20)
HEAT SHIELD (BF-30)
REFLECTOR SHIELD REAR
(BF-10 BF-20)
REFLECTOR SHIELD REAR (BF-30)
REAR SHIELD (BF-10 BF-20)
REAR SHIELD (BF-30)
REFLECTOR ASSEMBLY
(BF-10 BF-20)
REFLECTOR ASSEMBLY (BF-30)
CASING LOUVER-BOTTOM
ASSEMBLY (BF-10 BF-20)
CASING LOUVER-BOTTOM
ASSEMBLY (BF-30)
CHROME GRILL (BF-10 BF-20)
CHROME GRILL (BF-30)
GLASS (BF-10 BF-20)
GLASS (BF-30)
INLET REGULATOR - NAT
INLET REGULATOR - LPG
INLET REGULATOR BRACKET
TUBING - GAS VALVE TO BURNER
(BF-10 BF-20)
TUBING - GAS VALVE TO BURNER
(BF-30)
TUBING - INLET REGULATOR TO
GAS VALVE
MALE CONNECTOR 5/16 TUBE X 3/8
NPT (2 REQUIRED)
GAS VALVE (BF-10 NAT AND LPG)
GAS VALVE (BF-20 NAT AND BF-30
NAT)
GAS VALVE (BF-20 LPG AND BF-30
LPG)
d. Pilot flame not surrounding thermocouple - clean pilot, see
Page 7.
e. Inlet gas pressure too low, contact gas supplier.
f. Thermocouple defective - replace pilot.
g. Gas control defective - replace.
4. Main burner does not ignite.
a. Main burner orifice is blocked - clean, see "Proper Main
Burner Flame," Page 6.
b. Inlet gas pressure too low, contact gas supplier.
5. Heater keeps shutting "OFF" during normal operation.
a. Pilot is blocked - clean pilot, see Page 7.
b. Inlet gas pressure too low, contact gas supplier
INDEX
PART
NO.
NO.
21
SR-113
22
10460
23
10422
23
10480
24
10424
25
10461
26
P-214
26
P-193
26
P-252
26
742286
26
P-211
26
P-185
27
P-212
28
10424
29
10539
29
10540
30
R-5007
30
R-5001
31
R-5003
32
SR-120
32
SR-115
33
SR-122
33
SR-116
34
8520142
35
8520141
36
SR-196
36
SR-198
37
VF-068
38
8720161
39
R-2395
40
R-2503
41
R-2396
42
11231
NOT SHOWN
SR-219
NOT SHOWN
SR-216
DESCRIPTION
VALVE BRACKET
BURNER BRACKET - LEFT
BURNER (BF-10 BF-20)
BURNER (BF-30)
AIR SHUTTER (BF-10 ONLY)
BURNER BRACKET - RIGHT
MAIN BURNER ORIFICE (BF-10 NAT)
MAIN BURNER ORIFICE (BF-10 LPG)
MAIN BURNER ORIFICE (BF-20 NAT)
MAIN BURNER ORIFICE (BF-20 LPG)
MAIN BURNER ORIFICE (BF-30 NAT)
MAIN BURNER ORIFICE (BF-30 LPG)
ORIFICE HOLDER
AIR SHUTTER (BF-10 NAT & LPG)
(BF-20 & BF-30 LPG ONLY)
TUBING - GAS VALVE TO PILOT
(BF-10 BF-20)
TUBING - GAS VALVE TO PILOT
(BF-30)
PILOT ASSEMBLY (NAT ONLY)
(INCLUDES 31)
PILOT ASSEMBLY (LPG ONLY)
(INCLUDES 31)
THERMOCOUPLE LEAD
OPTIONAL SRS-18 FLOOR STAND
KIT (BF-10 BF-20)
OPTIONAL SRS-30 FLOOR STAND
KIT (BF-30)
OPTIONAL SRB-18T BLOWER KIT
(BF-10 BF-20) (INCLUDES 34
THROUGH 41)
OPTIONAL SRB-30T BLOWER KIT
(BF-30) (INCLUDES 34 THROUGH 41)
BRASS BUSHING (4 REQUIRED)
RUBBER GROMMET (4 REQUIRED)
BLOWER PAN (BF-10 BF-20)
BLOWER PAN (BF-30)
CORD SET ASSEMBLY
BUSHING - HEYCO #SR5KN4
WIRE ASSEMBLY
FAN CONTROL
BLOWER (INCLUDES MOTOR, FAN,
AND FAN HOUSING)
FAN CONTROL BRACKET (BF-10)
BLOWER HARDWARE PACKAGE
HARDWARE PACKAGE
Page 9