Jandy Jandy Pro Series Manual de inicio rápido

Navegue en línea o descargue pdf Manual de inicio rápido para Sistemas de filtración de agua Jandy Jandy Pro Series. Jandy Jandy Pro Series 2 páginas. Single element cartridge pool & spa cs filters
También para Jandy Jandy Pro Series: Manual del usuario (12 páginas), Manual de instalación (16 páginas), Manual de instalación y funcionamiento (20 páginas), Manual del usuario (20 páginas), Manual (8 páginas), Manual de instalación y funcionamiento (20 páginas), Instrucciones de instalación (2 páginas), Manual de instalación y funcionamiento (16 páginas), Manual de instalación y funcionamiento (16 páginas), Manual de instalación y funcionamiento (16 páginas)

Imprimir página

Jandy Jandy Pro Series Manual de inicio rápido

Control Panel

• DISPLAY

Shows TruClear™ status and

chlorine production percentage.

Indicates TruClear is in standby mode

and will not be producing chlorine even

if the filter pump is running.

Indicates TruClear has detected filter

pump activation and is initiating chlorine

production.

Indicates TruClear is currently producing

chlorine and displays current production

output percentage.

Indicates TruClear is connected to a

remote automation system via RS485*.

™

Press to turn power to system on. Press and

hold for 6 seconds to completely power the

system down. A single quick press will toggle the

system from Standby to Auto mode when not

connected to a remote automation system via

RS485*.

In normal operation, the up and down arrows are used to set the output level of the chlorinator.

The output should be adjusted in order to achieve the desired Free Available Chlorine level of 2-4 ppm.

The back/save button will save any changes you have made in the menu and send you back to the

previous menu screen. The select button will scroll through and open any available parameters for editing.

BOOST - Can be used to maximize chlorine output for a short period

of time. To activate BOOST, press

and

simultaneously.

Boost will end after 24 hours. To turn off BOOST, press

LOW - Can be used to minimize chlorine output while activated. To

activate LOW, press

and

simultaneously. LOW will stay

active indeﬁ nitely. To turn off LOW, press

Setting the Chlorine Output Level

Factors to consider:

If the output level is >90% and tested

- number of gallons in the pool

water shows insufﬁ cient chlorine

- number of bathers (bather load)

residual, you may need to shock the

- pollen and dust concentration

pool or add Cyanuric Acid (CYA) to

- number of hours the pump runs

protect against UV degradation.

- single or variable speed pump use

More pump runtime will result in more

- climate and water temperature

chlorine in the water.

- amount of introduced rain water

It may take several adjustments

Pools at <15K gallons start at 40%.

over several days to ﬁ nd the right

Pools at 25K - 30K gallons start at 60%.

production rate for your application.

If these levels do not result in 2 - 4

PPM chlorine residual, raise the

output level.

*When connected to an automation system via RS485, full control of the TruClear system is given over to

the automation controller. No functionality will persist at the TruClear UI. In order to control the TruClear

from the UI, the automation system must ﬁ rst be placed into service mode. For details on service mode

please consult the operation manual for the controller you are using as follows:

● AquaLink RS: 6594 ● Z4: H0386500 ● PDA: H0572300

Important Safety Instructions

FOR YOUR SAFETY - This product must

be installed and serviced by a contractor

who is licensed and qualiﬁ ed in pool

equipment by the jurisdiction in which

the product will be installed where such

state or local requirements exist, the

maintainer must be a professional with

sufﬁ cient experience in pool equipment

installation and maintenance so that all of

the instructions in the installation manual

can be followed exactly. Before installing

this product, read and follow all warning

notices and instructions that accompany

this product. Failure to follow warning

notices and instructions may result in

property damage, personal injury, or death.

Improper installation and/or operation will

void the warranty. Improper installation

and/or operation can create unwanted

WARNING

EQUIPMENT UNDER PRESSURE: Always

turn pump off prior to installing or servicing the

power pack or cell. Your pump/filter system

is operated under pressure and the pressure

must be released before you begin work.

Please see your pump/filter owner's manual for

further instructions.

To reduce the risk of electric shock, fire or

injury, service should only be attempted by a

qualified pool service professional.

Jandy® Pro Series chlorine generating

devices are designed for domestic (residential)

swimming pool use only. Contrary use could

affect performance, void warranty, and may

result in property damage, serious injury, or

death.

• Operating a chlorine generator without water

flowing through the cell may cause a build

up of flammable gases, resulting in fire or

explosion.

• Keep equipment out of reach of children.

• A damaged supply cord should only be

replaced by the manufacturer, service agent or

electrician.

• When installing and using this electrical

equipment, always follow basic safety

precautions.

• Before performing installation, disconnect all

power.

• Connect to a circuit that is protected by a

ground-fault circuit interrupter (GFCI).

H0613400_REVC

Quick Start Guide

electrical hazard which can cause serious

injury, property damage, or death. Turn off

all circuit breakers supplying power to the

equipment you are intending to service or

install in order to prevent the possibility of

electric shock.

Included installation and operation manual

(H0470600),also available online at

www.ZodiacPoolSystems.com or by calling:

USA: 1-800-822-7933

CANADA: 1-888-647-4004

AUSTRALIA: 1800-688-552

All electrical work must be performed

by a licensed electrician and conform

to all national, state, and local codes.

When installing and using this electrical

equipment, basic safety precautions should

always be followed, including the following:

• Do not install within an outer enclosure or

beneath the skirt of a hot tub or spa.

Installation must be done in accordance with

the National Electrical Code® ("NEC®" or

NFPA-70®) in the US, the Canadian Electrical

Code ("CEC" or C22.1) in Canada, and/or any

other local and national installation codes.

RISK OF ELECTRIC SHOCK, FIRE,

PERSONAL INJURY, OR DEATH. Connect

only to a branch circuit that is protected by a

ground-fault circuit interrupter (GFCI). Contact

a qualified electrician if you cannot verify that

the circuit is protected by a GFCI. Make sure

such a GFCI is provided by the installer and

should be tested on a routine basis. To test the

GFCI, push the test button. The GFCI should

interrupt power. Push the reset button. Power

should be restored. If the GFCI fails to operate

in this manner, the GFCI is defective. If the

GFCI interrupts power to the pump without the

test button being pushed, a ground current is

flowing, indicating the possibility of electrical

shock. Do not use the device. Disconnect the

device and have the problem corrected by a

qualified service representative before using.

A green/yellow grounding wire is provided

inside the power pack. To reduce risk of

electric shock, connect the ground wire to the

grounding wire that is supplying power to the

unit.

The power pack must be interlocked/

interconnected with the pool pump motor

power source to ensure that the chlorinator

only operates when the pool pump is

operating.

TruClear

™

Chlorine Generating System