HIKVISION DS-3WF03C Manual de inicio rápido - Página 9

Navegue en línea o descargue pdf Manual de inicio rápido para Hardware de red HIKVISION DS-3WF03C. HIKVISION DS-3WF03C 16 páginas.

DS-3WF03C Quick Start Guide

Chapter 2 Installation

Step 1 Select the unobstructed high point around the device to ensure that the devices are aligned

and there is no obstruction in the middle. Fix the device as shown in the figure below. Attach the

back of the device to the pole, use the hoop to pass through the hoop hole on the back of the

device, tighten the hoop, and fix the device on the pole.

Figure 2-1 Install host

Step 2 Connect the PoE interface of the device to the PoE interface of the PoE power supply

through the network cable. The LAN interface of the device and the LAN interface of the PoE

power supply can be connected to the front-end network devices such as IPC through the network

cable, as shown in the following figure.