Lexmark 912dn - C Color LED Printer Referencia rápida - Página 2

Navegue en línea o descargue pdf Referencia rápida para Impresora Lexmark 912dn - C Color LED Printer. Lexmark 912dn - C Color LED Printer 2 páginas. Lexmark c912: quick start

Imprimir página

Loading paper

Your printer supports a wide variety of paper types, sizes,

and weights. The standard tray (tray 1) and optional trays 2,

3, and 4 are marked with stack height letters A, B, and C.

The optional heavy media tray is marked with stack height

letters D, E, and F.

The following table lists recommended media, weights, and

the stack height guide to use when loading the paper trays.

Stack

Recommended media

height

Lexmark Glossy Paper

: Letter (P/N 12A5950),

A4 (P/N 12A5951)

11x17, Legal, B4, A3 (90–105 g/m

, 24–28 lb bond)

Letter, A4 (60–105 g/m

, 16–28 lb bond), 11x17,

Legal, B4, A3 (60–90 g/m

, 16–24 lb bond)

Lexmark Transparency

: Letter (P/N 12A5940),

A4 (P/N

12A5941

)

Lexmark Glossy Paper

: Letter (P/N 12A5950),

A4 (P/N 12A5951)

Paper Labels: Letter, A4 (up to 180 g/m

, 48 lb bond)

Letter, A4 (105–128 g/m

, 28–34 lb bond)

Lexmark Glossy Paper is 120 g/m

, 80 lb. book, 32 lb bond.

Lexmark Transparency weight is 170 g/m

To help prevent jams:

•

Flex all stacks of

print media back

and forth to

loosen them, and

then fan them

before loading. Do not fold or crease the print media.

Straighten the edges of the stack on a level surface.

•

Do not exceed the maximum stack height. Overfilling

may cause jams.

Loading a 550-sheet tray

Note:

If you are loading an optional heavy media

paper tray, make sure the paper size and type are set

for the print media you are loading. Refer to the

publications CD for instructions on setting the paper

size or paper type.

Pull the paper tray

out until it stops.

Press the metal

plate down until it

locks.

Squeeze the left

guide and slide it

to the position for

the size paper you

are loading.

The position of the

left paper guide

tells the printer

the size of the

paper in the tray.

Release the paper guide.

Flex the sheets back and forth to loosen them, and

then fan them.

Place the paper

in the tray, print

side down.

Squeeze the front

paper guide lever

and slide the

guide until it

lightly touches

the stack of

paper.

Rotate the paper

size dial until you

see the correct

size of paper in

the window.

Push in the tray

completely.

Loading the multipurpose feeder

Warning:

Feeding more than a single sheet of glossy

paper may damage the fuser.

You can load up to 100 sheets of plain paper, 10 envelopes,

or one sheet of banner or glossy paper in the multipurpose

feeder. Refer to the publications CD or Setup Guide for

capacity limits for other print media.

Open and extend

the multipurpose

feeder.

Slide the paper

guides to the

correct position

for the size paper

you are loading.

Press the paper

feed plate down

until it locks into

place.

Flex the sheets

back and forth to

loosen them, and

then fan them.

Place the paper

print side up

between the

paper guides.

Move the SET

button to the left to

unlock the tray.

Loading the high capacity feeder

Note:

Load only plain paper in the high capacity

feeder.

You can load up to 3,000 sheets of plain paper in the high

capacity feeder.

Open the top

cover.

Check the position

of the paper

guides.

If the paper guide

arrows are

correctly aligned to

the size paper you

are loading, go to

step 6. If not,

continue with

step 3.

Loosen the left and right paper guide thumbscrews.

Slide the guides

left or right to the

correct position for

the size paper you

are loading (A4 or

Letter).

Tighten the left

and right paper

guide

thumbscrews.

Flex the sheets

back and forth to

loosen them, and then fan them.

Place the paper

against the paper

guides, with the

print side up.

Note:

If there is

only a partial stack

of paper in the tray,

the paper low

sensor will not

allow the tray to go

down. Add more

paper to lower the

tray.

Press the paper

tray button.

The paper tray

lowers so you can

load another 500

sheets of paper.

Repeat steps 7

and 8 until you

have loaded the

desired quantity.

Close the top cover.