Jandy Jandy Pro Series Manual de instalación y funcionamiento - Página 12

Navegue en línea o descargue pdf Manual de instalación y funcionamiento para Filtro de piscina Jandy Jandy Pro Series. Jandy Jandy Pro Series 20 páginas. Single element cartridge pool & spa cs filters
También para Jandy Jandy Pro Series: Manual del usuario (12 páginas), Manual de instalación (16 páginas), Manual de instalación y funcionamiento (20 páginas), Manual del usuario (20 páginas), Manual (8 páginas), Manual de inicio rápido (2 páginas), Instrucciones de instalación (2 páginas), Manual de instalación y funcionamiento (16 páginas), Manual de instalación y funcionamiento (16 páginas), Manual de instalación y funcionamiento (16 páginas)

Page 12

ENGLISH

3.7

Static Pipe Installation in a New

Fountain

Figure 9 shows a static pipe installation in a new

fountain (or other environment: cooling tower, pond,

reservoir, storage tank, etc.).

Please note that Zodiac does not supply the Inner Sleeve

and Deck Lid Housing Assembly, the Brass Lid, or

Drain Cover.

You can construct an Inner Sleeve using a piece of 6" or

8" PVC pipe to make a sleeve that fits the lid and collar

you are using.

Inner Sleeve/Deck Lid Housing Assembly

(Not Available from Zodiac)*

Minimum Operating Water Level

Low Water Cutoff Level

(Not Available from Zodiac)

NOTE

Figure 9. Static Pipe Installation

* To make the Inner Sleeve, use a piece of 6" or 8" PVC pipe to make a sleeve that fits the lid and collar you are using.

Jandy Pro Series Levolor

Models K-2100

1" Coupling

Fill Probe

Sensor Common Probe

Low Water Cutoff Probe

Drain Cover

When mounting a slip-style sensor in a static pipe, glue 1" fittings with 793 IPS brand

ABS/PVC glue. Do not glue 2" fittings.

II Electronic Water Leveler

Brass Lid

(Not Available from Zodiac)

Installation and Operation Manual

Remote Sensor Housing

½" Conduit Connection

Conduit to

Sensor Control System

at Control Box

2" P.V.C. Equalizer Line