Garden Wood Furniture SIENNA FINISH 963KFSIc Manual de instrucciones de montaje - Página 3

Navegue en línea o descargue pdf Manual de instrucciones de montaje para Mobiliario interior Garden Wood Furniture SIENNA FINISH 963KFSIc. Garden Wood Furniture SIENNA FINISH 963KFSIc 12 páginas. Potting bench

Imprimir página

ASSEMBLY INSTRUCTIONS

TOOLS REQUIRED: 4mm Hex Wrench (provided), Phillips Screwdriver,

Adjustable Wrench, Padded Hammer or Rubber Mallet, Outdoor Wood Glue

1) Glue four Wood Dowels (D) into the Hutch Right Side (Kc): one in the highest hole along the back

edge, one in the third hole down, one in the second hole from the bottom, and one in the middle

hole in the row across the cente r. Repeat for the Hutch Left Side (Jc).

Insert Hutch Shelf (Nc) over the Dowel in the center of Hutch Right Side (Kc) so that the predrilled

holes in both pieces line up. Insert two 6x50mmm Hex Screws (Ac) through the holes in the Side

into the shelf and using the provided Hex Wrench (Hc), fasten securely.

Attach the Hutch Shelf Back (Lc) to the Hutch Right Side with a 6x50mm Hex Screw (Ac) in the

other hole. Insert one 4x40mm Phillips Screw (B) into the predrilled hole in the bottom of the shelf

and into the back.

Attach the Hutch Apron (Mc) over the bottom Dowel and fasten with a Hex Screw.

Repeat for the Hutch Left Side (Jc). See Figure 1.

Fig. 2

2) Glue two Wood Dowels (D) into each end of both Center Shelf Side Aprons (Pc). Spread a light

film of glue in the two holes in the Center Shelf Front Apron (Qc) and Center Shelf Back Apron

(Oc).

Attach the four aprons together with the dowels. Pocket drilled holes must all face the same

direction. See Figure 2.

963KFSIc Potting Bench

Fig. 1

Fig. 1a

963KFSIc – Page 3 – 10/08