Jandy Pro Series K-2000 Manual de instalación y funcionamiento - Página 7

Navegue en línea o descargue pdf Manual de instalación y funcionamiento para Equipos de iluminación Jandy Pro Series K-2000. Jandy Pro Series K-2000 20 páginas. Electronic water leveler

Imprimir página
Jandy Pro Series Levolor
II Electronic Water Leveler
®
Models K-2000

Section 3. Installation Instructions

3.1

Materials and Tools

Installation Materials Furnished for
Levolor II, Model K-2000
Three-probe Sensor with Wire
24VAC Solenoid Valve
1" Coupler
Control Box (K-2000)
Remote Sensor Housing
Hardware Kit
Grease-Filled Wire Nuts for Valve
Screws
Anchors
Installation and Operation Manual -
Warranty Information
Additional Materials Needed for Installation
DPST (Dual Pole Single Throw) 24VDC Relay with
Contacts Properly Rated for Pump Selected
Anti-Siphon Valve*
2-Conductor 18-Gauge Solid-Core Burial Cable
Wire Nut Connectors for the Sensor, Relay, and
Power Connections.
*The anti-siphon valve is not necessary if the
connection is made from the irrigation system.
NOTE You can order a 24VDC relay rated for 3 HP
from Jandy (Part No. R0658100).
Open the box and check to see that it contains the
contents listed above. If it does not, contact your dealer
or Zodiac technical support at 1 (800)-822-7933.
|
Installation and Operation Manual
3.2

Installing the Control Box

1.
Mount the control box to the wall near the pump
and filter. See Figure 2. Do not install the control
box within 10 feet (3 meters) of the pool edges.
Qty
Fill Line
1
1
1
1
1
1
2 per kit
4 per kit
4 per kit
1
Figure 2. K-2000 Installation
2.
Mount the control box at eye level. Leave
sufficient clearance on all sides of the chassis
backplate.
3.
Check the source voltage. (The unit is factory
wired for 220 volt operation.) To modify the
wiring for 110 volt operation, see Section 3.3,
Changing Wiring for 110 Volt Operation.
4.
For 220 volt operation, connect the black wire to
line 1 and connect the black wire with the yellow
stripe to line 2. See Figure 3.
Ground
Figure 3. Factory Wiring for 220 Volt Operation
ENGLISH
Filter
Anti-siphon
Valve
Transformer
1
5
2
6
Line 2
Line 1
Page 7