Gardena HE 36 4000 Manual de instrucciones - Página 5

Navegue en línea o descargue pdf Manual de instrucciones para Cortacésped Gardena HE 36 4000. Gardena HE 36 4000 14 páginas.

Imprimir página

GARDENA Hattrick HE 32 / HE 36 / HE 40

1. Technical data

HE 32

Motor

Power consumption

1300 W

Voltage

230 V

Frequency

50 Hz

Casing

plastic

Cutting width

32 cm

Cutting height

25 - 55 mm

Weight

15.5 kg

Grassbox / grass catcher capacity

32 l

Wheels

plain bearing

Working area related emission

characteristic value L

74 dB (A)

Noise level L

85 dB (A)

Vibrations a

< 2.5 ms

vhw

Measuring method 1) according to EN 836 2) according to 84 / 538 / EC

2. Operating instructions information

Please read and follow these

For safety reasons chil-

operating instructions carefully.

dren under the age of

Familiarise yourself with the unit's

16 or people not familiar with

features, its proper use and the

these operating instructions

safety instructions included.

must not use this electric

Hattric lawn mower.

3. Product use

The GARDENA Hattrick HE 32 /

It is essential to observe the

HE 36 / HE 40 lawn mowers are

manufacturer's operating instruc-

designed for cutting and aerating

tions to ensure the unit's proper

lawns in and around the garden.

functioning. The operating instruc-

tions also contain advice for

They are not designed for use in

service, maintenance and repair.

public facilities, parks, sporting

grounds, on roads, in agriculture

Attention! To prevent in-

or forestry.

jury, the electric Hattrick

lawn mower must not be used

4. Assembly

4.1 Assembling the

.Grassbox

Hattrick HE 32

.1 handlebar frame upper

section (handle with switch)

Parts list check

.2 lower handlebar frame

The packaging of the HE 32

sections

should include the following

.Fasteners for handlebar frame

parts:

.Operating instructions

.Electric Hattrick lawn mower

.TORX

HE 32

changing blades

HE 36 / MulchCut

HE 40 / MulchCut

electric engine with brake

1400 W

1600 W

230 V

50 Hz

plastic

36 cm

40 cm

30 - 70 mm

30 - 80 mm

20.6 kg

27.5 kg

36 l

55 l

plain bearing

ball bearing

74 dB (A)

78 dB (A)

87 dB (A) / 89 dB (A)

88 dB (A) / 90 dB (A)

- 2

< 2.5 ms

Please keep these instructions

in a safe place.

for trimming bushes, hedges,

shrubs, for cutting and pruning

of climbers or grass on roofs

or in balcony boxes. In addi-

tion, the electric Hattrick lawn

mower must not be used for

chopping up branches, twigs

or for levelling irregularities

in the soil.

Mounting the guide handle

(ill. I)

1. Slide the lower sections of the

frame into the recesses so that

the flat sides point outwards.

2. Screw the frame in place using

the wing screws (25) supplied.

-screwdriver for

3. Place the guide handle (1) into

the hollow grooves and attach

it to the lower handlebar frame

using the screws (24) and

wing nuts (23) supplied.

Note: The cable should always

pass along the outside of the

frame (ill. I) and should never

be pinched or crimped.

4. To tighten the cable, put the

clamp (2) from outside onto

the lower part of the frame

(ill. I, detail).

4.2 Assembling the

Hattrick HE 36 / HE 40

Parts list check

The packaging of the HE 36 /

HE 40 should include the follow-

ing parts:

.Electric Hattrick lawn mower

- 2

.Grass catcher (disassembled)

.Top of guide handle

.Fastening elements

for guide handle

.Operating instructions

with warranty card

-screwdriver for

.TORX

changing

blades

5. Using the product

5.1 Connecting the unit

– cable lock / extension cable

Hattrick HE 32 (see ill. L / M)

Hattrick HE 36 / HE 40 (see ill. B)

First plug the extension cable (7)

from below into the base socket

of the combination switch / plug

(8). Loop the extension cable (7)

and insert it into the cable lock

(9) on the guide handle, allow the

lead to the socket to sag a little.

The cable lock prevents uninten-

tional disconnection of the elec-

tricity.

Lay out the surplus cable in loose

loops at the side of the cutting

lane and at the centre of the lane

length.

Note: Connect the extension

cable to the mains so that it

always feeds from the cut side.

5.2 Starting the Hattrick lawn

mower

Hattrick HE 32 (see ill. L)

Hattrick HE 36 / HE 40

(see ill. B / C)

Mounting the guide handle

The carrying handle (4) is below

(ill. A)

the protective cover (15).

1. Swivel the folded bottom part

1. Unfold the grass catcher (3)

of the guide handle (A 1) into

and insert the supporting frame

the working position and allow

(5) through the opening of the

it to engage. Tighten well with

grass catcher (3) so that the

the lower linkage locking

plastic base is on the bottom.

handles (2).

2. Then bend up the fastening

2. Put the top of the guide handle

flaps (6) by hand according

(A 2) onto the bottom part of

to illustration 2 and use them

the guide handle (A 1) and

to fix the grass catcher (3)

secure using the fastening

to the supporting frame (5)

bits (screw and plastic wing

according to illustration 3.

nut).

3. Fasten the carrying handle (4)

3. Insert the connection cable

by pressing the supporting

into the cable guide on the

frame (5) according to illustra-

wing screw (A 3).

tion 4. The assembled grass

catcher is shown in illustration

Note: Only mount the screw

with the cable guide on the

cable guiding side of the

Note: The supporting frame (5)

handle.

is bent for fixing the carrying

handle (4).

Mounting the grass catcher

(illustration sequences 1-5)

The grass catcher is supplied

loose (3 component parts).

Place your electric Hattrick lawn

Hattrick HE 36 / HE 40

mower on an even area of the

If the aerator cylinder or the cut-

lawn.

ting blades are blocked by a for-

eign body or if the motor is over-

To start the mower depress the

loaded the motor switches off

release button (10) on the combi-

automatically within 20 to 35 sec-

nation switch / plug (8) and simul-

onds due to the built-in overload

taneously pull the safety handle

protection. In that case release

(11) to the guide handle with the

the safety handle (11). Discon-

other hand. As soon as the motor

nect the mains plug ! Remove

starts you can release the release

the foreign body if necessary.

button (10).

Note : In long, wet grass, to

If you release the safety handle

start your electric Hattrick

(11) the motor switches off.

easily, slightly raise one side

A built-in motor brake still the cut-

of the mower.

ting blades within three seconds.

The switches installed

Hattrick HE 32

by the manufacturer must

If the aerator cylinder or the

not be removed or be bridged

cutting blades are blocked by

eg : by taping down the safety

a foreign body or if the motor is

handle to the guide handle.

overloaded release the safety

This will prevent the mower

handle (11) and disconnect the

switching off automatically,

mains plug ! Remove the for-

and could cause fatal injury.

eign body if necessary.

Attention! Cutting blades con-

tinue to run for three seconds

after the motor is switched off.