KitchenAid KGBS 246S Manual de instrucciones de instalación - Página 4
Navegue en línea o descargue pdf Manual de instrucciones de instalación para Horno KitchenAid KGBS 246S. KitchenAid KGBS 246S 11 páginas. Gas built-in single & double ovens
Imprimir páginaUNPACKING
THE UNIT
Personal Injury
Floor Damage
More than one person is required to lift or
move the oven because of its weight and
size. Failure to follow these instructions
may result in personal injury.
Keep shipping base under oven.
Failure to do so could cause damage
to floor covering.
The oven
should
be left on the carton
base until
it is ready
to
put
into
the cabinet.
It is also recommended
that
the pad(s)
over
the
door(s)
be
left
in place.
These
precautions
will
reduce
the possibilitv
of damaqe
to the front
of the unit
and
the bottom'of
the frdnt
frame.-
Remove
all cards,
tape and wire
used to hold various
parts
in
posltion
during shipment.
Study all labelsand
followtheir
instruc-
tlons during
Installation.
To remove
oven racks
1. Slide rack all the way to the back of the oven.
2. Lift the back of the rack up above the rack guides
3. Pull forward to remove.
GAS SUPPLY CONSTRUCTION
Observe all governing codes and ordinances.
Fire Hazard
l
Oven must be connected to a regulated gas supply.
l
L-P. gas supply must not exceed a pressure of 12" water column.
This must be checked by a qualified technician before installing
the oven.
l
Do Not use an open flame to test for leaks from gas
connections.
Failure to follow these instructions
could result in a fire, explosion
or personal injury.
A manual
shutoff valve accessible
from the front of the oven is provided
to permit the gas to be turned off for servicing.
All gas connections
should
be made by a qualified
technician.
Apply a thread of sealant,
resistant
to natural
and L.P.
gases,
on all threaded
gas connections.