Avaya
Campus
PBX
MICHIGAN STATE UNIVERSITY
Telecommunication Systems
Avaya 2410
Quick Reference Guide
1. Line Appearance
/Feature Buttons
2. Display
3. Message Lamp
4. Menu Softkeys
5. Messages Button
6. Arrow Keys
7. Hold Button
8. Transfer Button
9. Conference
Button
10. Drop Calls
Button
11. Redial Button
12. Dialpad
13. Volume
Control Buttons
14. Mute Button
15. Headset Button
16. Speaker Button
17. Exit Button
Avaya 2410 Telephone
For accessing incoming/outgoing lines and
programmed features.
The display has two screens and shows status for the
line appearances, incoming calls, on hold calls, caller
Ids, date and time.
This lamp is lit when a message has arrived in your
voicemail box.
These keys allow you to perform specific options. To
initially view softkey labels, press any softkey.
For dialing the voicemail system.
Use these keys to move between screen pages, to cycle
through entries, and to move the cursor.
For placing a caller on hold.
Sends a call from your extension to another extension.
Allows you to conference up to six parties on a call so
you can conduct up to a six-way conversation.
Returns to dial tone without hanging up and returns a
transferred call to you when not accepted at the
transferred number.
Use to redial the previous extension or number called.
12-button pad that allows you to dial telephone
numbers as well as program names and numbers.
Use to adjust speaker, handset, headset, or ringer
volume depending on which component is in use.
Turns off the microphone in the handset, headset or
speaker so the person at the other end of the call
cannot hear you.
Use to activate a headset that is connected to the 2410
headset jack.
Use to access the built-in, speakerphone, allowing you
to make and listen to calls without lifting your handset.
Pressing this button returns you to the first page of the
Home screen. You need to be on the Home screen to
see caller ID.
Imprimir página