Lexmark E 330 Instrucciones técnicas - Página 6

Navegue en línea o descargue pdf Instrucciones técnicas para Impresora Lexmark E 330. Lexmark E 330 8 páginas. How to reset the photoconductor page count through the printer's configuration menu
También para Lexmark E 330: Especificaciones (2 páginas), Configurar (2 páginas), Referencia rápida (2 páginas), Información de seguridad (2 páginas), Folleto (2 páginas), Especificaciones (4 páginas), Cómo reiniciar (2 páginas)

Imprimir página

Step 5

Remove the drum. (See Photo 32)

If you plan on reusing the drum,

clean the drum with a soft lint-

free cloth and place the drum in

a protected area out of the light.

Photo 32

Step 6

Grasp the PCR contact saddles

and lift the PCR from the waste

hopper. (See Photo 33) Clean the

PCR using a dry lint-free cloth.

Photo 33

E-mail: [email protected]

Photo 34

Photo 35

Photo 36

Photo 37

Photo 38

Lexmark E232/330/332 Technical Instructions

Step 7

Remove the two screws holding the wiper

blade.

(See Photo 34)

Step 8

Remove the wiper blade. (See Photo 35)

Clean the waste hopper and wiper blade

using dry compressed air or a vacuum.

Step 9

Apply padding powder to the wiper

blade. Place the blade into the waste hop-

per and install the two screws that hold

the blade in place. (See Photo 36)

Step 10

Clean the PCR saddles using a cotton

swab and alcohol. Place the saddles onto

the ends of the PCR and place the PCR

back into the waste hopper.

(See Photo 37)

Step 11

Place the waste hopper so that it is facing

towards you. Apply padding powder to

the drum and place the drum in the hop-

per so the drive gear is on the left side of

the cartridge.

(See Photo 38)

Website: