Avaya Merlin Legend Nota de configuración - Página 8

Navegue en línea o descargue pdf Nota de configuración para Teléfono IP Avaya Merlin Legend. Avaya Merlin Legend 11 páginas.
También para Avaya Merlin Legend: Programación del sistema (2 páginas)

Imprimir página

AVAYA Merlin Legend

9. DTMF Length during Dialing (ms) = 80

10. DTMF Length during Detection (ms) = 50

Next access the Transfer/Outcall tab

1. Transfer Mode = Blind

2. Transfer Prefix Code = &,XN

3. Transfer Completion Code = Leave Blank

4. Transfer Release Code when Busy = &

5. Transfer Release Code when No Answer = &

6. Transfer Release Code when Reject = &,&

7. Flash Time Interval (ms) = 500

8. Enable Call Progress = Enable by checking the box

9. Start Delay for Call Progress (ms) = 1000

Next access the Hangup Detection tab

1. Maximum Continuous Tone before Hanging Up (ms) = 6000

2. Hangup String = Leave Blank

3. Hangup String Timeout (ms) = 0

4. Minimum Duration For Drop in Loop Current (ms) = 300

5. Maximum Silence before Hanging Up (ms) = 6000

6. Select OK to save changes

Select Voice Server and access Telephony Interface (Dialogic

Analog)

1. Select the Analog tab

2. Playback Volume = 2

3. Number of Ports = Enter the number of ports in your system

Note: The MAS service must be restarted to allow port enabling

4. Enable each Port by checking the checkbox next to the Port field

5. Extension = Enter the proper extension number assigned to each port

6. Incoming Ring Count = 1

7. Primary ID = Leave Blank

8. Secondary ID = Leave Blank

9. Select OK to save changes

Next access PBX Integration

1. Select the General tab

2. Click on Inband to set as the Integration Type

3. Access the Inband tab

4. Maximum Inter-digit Gap (ms) = 500

5. Pause before Inband Digits (ms) = 2000

The above information is provided by AVAYA Inc. as a guideline. See disclaimer on page 1