Gardena 2403 Manual de instrucciones - Página 4
Navegue en línea o descargue pdf Manual de instrucciones para Recortadora Gardena 2403. Gardena 2403 15 páginas. Turbotrimmer
Imprimir página
3. Assembly
Mounting the cover
and plant guard :
4
1
3
4. Operation
Risk of injury !
Connecting the Turbotrimmer :
8
7
Setting the Turbotrimmer
to the working position :
C
B
E
D
12
1. Turn over the Turbotrimmer and
stand it on the rubber buffer of
the handle.
2. Fit the cover
2
head
and guide the cutting
3
filament
in the cover.
3. Secure the cover
two screws
4. Push the plant guard
the cutting head
hear it snap into place.
The plant guard keeps plants you
do not want to trim away from the
cutting filament.
2
Risk of injury if the Turbotrimmer does not switch off when
you release the start button.
V Never bypass the safety devices (by binding the start
button to the handle, for example).
1. Push the extension cable
the cable lock
2. Plug the plug
trimmer into the socket
extension cable.
Working position :
Position the additional handle
tilted slightly forward when you hold the Turbotrimmer in the
working position.
1. Unscrew the tightening nut
move the additional handle
to the correct position and tighten
B
the nut
A
Only for classicCut plus :
2. Unscrew the adjusting nut
set the additional handle
the correct angle and tighten
the adjusting nut
3. Unscrew the tightening nut
adjust the handle
correct length and tighten the
D
nut
by hand.
1
on the cutting
through the opening
1
using the
4
.
5
onto
2
until you
6
into
7
8
on the handle
9
of the Turbo-
0
of the
A
so that the cutting head
B
,
A
by hand.
C
,
A
to
C
by hand.
D
,
E
to the
.
9
0
2
5
7
6
is
A
2