Gardena 8893 Manual de instrucciones - Página 6

Navegue en línea o descargue pdf Manual de instrucciones para Recortadora Gardena 8893. Gardena 8893 15 páginas. Accu shears
También para Gardena 8893: Manual de instrucciones (9 páginas), Manual de instrucciones (15 páginas), Manual de instrucciones (16 páginas), Manual de instrucciones (16 páginas), Manual de instrucciones (10 páginas), Manual de instrucciones (15 páginas), Manual de instrucciones (17 páginas), Manual de instrucciones (16 páginas), Manual de instrucciones (16 páginas)

Imprimir página

1. Initial Operation

LED Accu Battery

Display Level:

5. Operation

WARNING!

Risk of Injury!

Cut grass / shrubs:

Telescopic Swivel Handle

Art. 8899 (optional):

0°

45°

90°

135°

-135°

180°

After each switch-off of the Accu Shears, the charge level of the

battery is shown for approx. 20 sec.

LED lights up green: Accu is fully charged.

LED lights up yellow: Accu is half-full.

LED lights up red:

There is a risk of injury if the switching devices installed

on the Shears are removed or bridged (e. g. by fastening the

on switch to the handle). This prevents the Accu Shears

switching off automatically.

v Never remove or bridge the switching devices.

The starting lockout

being switched on unintentionally.

1. Grass Shears:

Clear the area to be cut of stones and other solid objects and

remove the blade guard

Accu Shrub Shears:

Remove the blade guard

2. Ergonomic design ComfortCut:

Press elbow joint

with blade to desired angle.

3. Cutting:

Disengage the starting lockout

and press the ON button

again.

The GARDENA Telescopic Swivel Handle Art. No. 8899 for the

Accu Shears can be mounted in 45° steps. The swivel handle is

fully height adjustable (85 – 120 cm) and can be adapted to suit

your height.

v S lide blade protection

-45°

Fitting the Telescopic Swivel Handle:

v G uide the swivel handle

-90°

holder of the Accu Shears until the lock engages.

Removing the Telescopic Swivel Handle:

v P ress the release button

The starting lockout

no longer function when the swivel handle is mounted.

Accu is empty and must be recharged.

prevents your GARDENA Accu Shears from

from the cutting blade.

on both sides and adjust motor housing

by pushing it forwards

. Release the starting lockout

onto shear blade.

at the desired angle into the handle

and pull out the swivel handle.

and ON button

on the Accu Shears