Broadata Link Bridge LBC-HDMI-R-WP Manual del usuario - Página 11

Navegue en línea o descargue pdf Manual del usuario para Receptor Broadata Link Bridge LBC-HDMI-R-WP. Broadata Link Bridge LBC-HDMI-R-WP 20 páginas. Hdmi wall plate hdbaset transmission system

Imprimir página
LBC-HDMI-T/R-WP User's Manual
Link Bridge
HDMI Wall Plate HDBaseT Transmission System
TM

3.1 In-Wall Power/CAT-5e/6 Wiring Instruction

The
in-wall
LBC-HDMI-T/R-WP wall plate must confirm national and local
electrical codes, e.g., UL junction boxes shall be used and DC
power source shall not exceed product rated range (+24VDC
@ 1A). Follow the following steps for power/CAT5e/6
installation:
1.
Feed both CAT-5e/6 and power cables through the opening
of the wall box, and secure the cables with cable clamps
to provide strain relief.
2.
Terminated CAT-5e/6 with RJ45 connector to be directly
plugged into the RJ45 connector port of the
LBC-HDMI-T/R-WP unit.
3.
Before connecting power wire to the LBC-HDMI-T/R-WP
unit, make sure power supply is off. Prepare the Positive
(+24V) and chassis ground (CHASSIS to earth ground) tip
of the power wire as shown in Figure 3-1 to be directly
plugged into the captive screw +24VDC connector of the
LBC-HDMI-T/R-WP unit. Make sure the polarity of the
connection is correct. Insulate any exposed wire shields
to prevent short circuits.
12
power/CAT-5e/6
installation
Broadata Technical Support, (800) 214-0222
for
the