Gardena HighCut 48-Li 8882 Manual de instrucciones - Página 6
Navegue en línea o descargue pdf Manual de instrucciones para Recortadora Gardena HighCut 48-Li 8882. Gardena HighCut 48-Li 8882 15 páginas.
Imprimir página
8
7
A
0
5. Operation
Working positions :
6
1. Depress both locking buttons
from the battery holder
2. Plug the plug of the charger cable
3. Plug battery charger
Charging indicator lamp
7
The battery is being charged.
Charging indicator lamp
The battery is fully charged.
(For charging time, see 10. Technical Data.)
4. First remove the charging cable
and then unplug the battery charger
5. Put the battery
9
Avoid exhaustive discharge :
Do not wait until the blade comes to an absolute stop (battery
totally discharged) as this shortens the battery life.
v If the output of the hedge trimmer decreases noticeably,
charge the battery.
If the battery has been totally discharged, the LED will flash at
the start of charging. If the LED is still flashing after an hour, a
fault has occurred (see 8. Troubleshooting).
The hedge trimmer can be operated in 4 working positions.
Side trimming:
Cutting unit
rotated by 90°
6
and remove the battery
8
on the handle.
9
0
into a mains socket.
A
lights up red :
A
lights up green :
9
from the charging socket
7
on the battery holder
Vertical trimming
Horizontal
at high level :
trimming at
Telescopic tube
high level :
extended
Cutting head
tilted by 75°,
telescopic tube
extended
7
7
into the battery
.
0
from the mains socket.
8
on the handle.
Trimming at low
level :
Cutting head
extended by
-45°, telescopic
tube extended
17