Makita UB1101 Manual de instrucciones - Página 4

Navegue en línea o descargue pdf Manual de instrucciones para Herramienta eléctrica Makita UB1101. Makita UB1101 17 páginas. 12-1/4" planer, blade sharpener, plate joiner, chain mortiser, blower, heat gun
También para Makita UB1101: Folleto (1 páginas), Manual de instrucciones (8 páginas), Manual de instrucciones (8 páginas), Manual de instrucciones (5 páginas), Manual de instrucciones (17 páginas), Manual de instrucciones (17 páginas), Manual de instrucciones (5 páginas)

Imprimir página

Switch action

CAUTION:

Before plugging in the tool, always check to see

•

that the switch trigger actuates properly and

returns to the "OFF" position when released.

For UB1100

004753

To start the tool, simply pull the switch trigger. Release

the switch trigger to stop.

For continuous operation, pull the switch trigger and

then push in the lock button.

To stop the tool from the locked position, pull the switch

trigger fully, then release it.

For UB1101

004754

To start the tool, simply pull the switch trigger. Tool

speed is increased by increasing pressure on the switch

trigger. Release the switch trigger to stop.

For continuous operation, pull the switch trigger and

then push in the lock button.

To stop the tool from the locked position, pull the switch

trigger fully, then release it.

A speed control screw is provided so that maximum tool

speed can be limited (variable). Turn the speed control

screw clockwise for higher speed, and counterclockwise

for lower speed.

1. Switch trigger

2. Lock button

1. Switch trigger

2. Speed control

screw

3. Higher

4. Lower

5. Lock button

OPERATION

Blowing

004755

For dust blowing, attach nozzle to blower outlet, turning

clockwise to lock it in place.

Dust suction

004756

For dust suction, fit nozzle onto suction inlet and dust

bag onto blower outlet.

After the bag fills with dust, empty the contents of the

dust bag into a dust bin by releasing the fastener.

004757

MAINTENANCE

CAUTION:

Always be sure that the tool is switched off and

•

unplugged before attempting to perform inspection

or maintenance.

1. Nozzle

2. Blower outlet

1. Dust bag

2. Blower outlet

3. Nozzle

4. Suction inlet

1. Fastener