Makita XWT12RB Manual de instrucciones - Página 8

Navegue en línea o descargue pdf Manual de instrucciones para Herramienta eléctrica Makita XWT12RB. Makita XWT12RB 10 páginas.

Changing the impact force

► 1. Hard 2. Soft 3. Reverse rotation auto stop mode

4. Changed in three steps 5. Button

The function of Reverse rotation auto stop mode works only with pulling the trigger fully in counterclockwise tool

rotation. When the bolt/nut gets enough loosened, the tool stops the impact and rotation.

For approximately one minute after releasing the switch trigger, the impact force can be changed.

Impact force grade displayed

on panel

Hard

Soft

Reverse rotation auto stop

mode

NOTE: Reverse rotation auto stop mode is available only when the tool rotates counterclockwise. When rotating

clockwise in Reverse rotation auto stop mode, the impact force and speed are the same as Hard impact mode.

NOTE: When all lamps on the switch panel go out, the tool is turned off to save the battery power. The impact force

grade can be checked by pulling the switch trigger to the extent that the tool does not operate.

NOTE: While pulling the switch trigger, the impact force grade cannot be changed.

Maximum blows

-1

3,600 min

(/min)

-1

2,000 min

(/min)

-1

3,600 min

(/min)

You can change the impact force in three steps: hard,

soft, and Reverse rotation auto stop mode.

This allows a tightening suitable to the work.

Every time the button is pressed, the number of blows

changes in three steps.

Purpose

Tightening when force and

speed are desired.

Tightening when you need fine

adjustment with small diameter

bolt.

Loosening with auto stop

function.

8 ENGLISH

Example of application

Assembling steel frames.

Assembling furnitures.

Disassembling bolts/nuts.