Avaya Definity 6416 Manual del usuario - Página 16

Navegue en línea o descargue pdf Manual del usuario para Teléfono Avaya Definity 6416. Avaya Definity 6416 17 páginas. 6400 series, multi-line voice terminal
También para Avaya Definity 6416: Tarjeta de referencia rápida (6 páginas), Manual del usuario (14 páginas), Manual del usuario (2 páginas)

Imprimir página
Avaya Definity 6416 Manual del usuario
To change from the speakerphone to the handset:
1. Pick up the handset and talk. The red light next to Spkr goes oft.
To change from the handset to the speakerphone:
1. Press Spkr. The red light next to Spkr goes on.
2. Hang up the handset within 10 seconds.
To prevent the other party from hearing you:
1. Press Mute. The red light next to Mute) goes on. The other person cannot hear you. Press Mute again to
resume speaking to the other person. The red light next to Mute goes off. The other person can hear you
again.
To end a call when using the speakerphone:
1. Press Spkr again. - The red light next to Spkr goes off.
To use the handset and speakerphone simultaneously:
1. While you are active on the handset, press Spkr. The red light next to Spkr goes on. People in your office
can hear the conversation on the speakerphone, but you must use the handset in order to speak to the other
person.
Note: If you hang up the handset within 10 seconds after pressing Spkr, the call remains active on
the speaker. If you hang up the handset more than 10 seconds after pressing Spkr the speaker will
also turn off, and the call is disconnected.
To view the number or feature on a button, or the last number dialed:
1. Press the Menu button and then the softkey below View (if available on your display).
or, press View (if administered).
2. Press the selected feature button
Note: To view the last number that you dialed, press Redial, or to view the number stored on an AD
button, press the selected AD button. The feature assignment on the button, or the phone number is
shown.
3. To return to the Normal Mode display, press the Exit button or return to Step 2 to see another stored
number.
To test the lights and display:
1. Press and hold Trnsfr while on-hook. The lights go on in columns and all the display segments fill in.
Page 15
Stored Number
Test