Cosco Fitness CEB TRIM-300U Manual del usuario - Página 9

Navegue en línea o descargue pdf Manual del usuario para Bicicleta estática Cosco Fitness CEB TRIM-300U. Cosco Fitness CEB TRIM-300U 13 páginas. Magnetic

Imprimir página

the top hole of Handlebar support (7).

e. Insert the Handlebar support (7) to the Main frame (4) and secure it with

four M8x16 Bolts (42),

Attach the Handle Pulse Tube and Computer

a. Insert the Tension control wires (19) through into the hole of the

Handlebar support (7) and then pull them out from the top hole of

Handlebar support (7). Attach the Handlebar (8) to the Handlebar

locator(A) of the Handlebar post(7) with the Handlebar cover(69),

then insert the Tension control wires(19) into the hole of the

Handlebar support(7) with the Pole plug(70), and put the

Spacer(70) on the T-knob(71). Adjust the handlebar to the proper

position, and lock with the T-knob(71) tightly.

b. Connect the Computer wire (18) and the Pulse wires (19)and

sensor wire, insert the surplus wire into the Handlebar (7).then insert the Computer (11) to the top of

Handlebar support (7) ,make sure the computer is inserted to the handlebar support firmly.

with M5*10 cross-head screw(74)

5) Attach the Seat Cushion

Remove three M8 Nylon Nuts (59) and Φ8 Flat washers (55) from

underneath of the Seat cushion (20), and then attach the Seat cushion

(20) to the Seat cushion adjustable bracket(62) with the three M8 Nylon

Nuts (59) and Φ8 Flat washers (55) that were removed. (Refer figure 5)

6) Attach the Seat bracket

with the groove of the D-shaped washer (26) aiming to the slot of the seat support of the main frame (4),

pat the D-shaped washer (26) gently into the main frame (4). Then

Φ8 Spring washer (50)

(Refer figure 4)

and Arc washers (34). (Refer figure 3)

release the Spring Knob (27), insert the

then tighten it