Makita 12V 8413D Manual de instrucciones - Página 13
Navegue en línea o descargue pdf Manual de instrucciones para Taladro Makita 12V 8413D. Makita 12V 8413D 19 páginas. 12v / 14.4 v / 18 v cordless percussion-driver drill equipped with electric brake
Imprimir página
Adjustable depth rod
The adjustable depth rod is used to drill
holes of uniform depth Loosen the thumb
screw, set to desired position, then tighten
the thumb screw
OPERATION
Screwdriving operation
First, turn the actlon mode changing ring so
that the arrow on the tool body points to
the wS3 marking Adjust the adjusting ring
to the proper torque level for your work
Then proceed as follows
Place the point of the driver bit in the screw
head and apply pressure to the tool Start
the tool slowly and then increase the speed
gradually Release the trigger as soon as
the clutch cuts in
~
_
_
_
~
_
_
_
~~
~
~~
-~
NOTE:
*Make sure that the driver bit is inserted straight in the screw head, or the screw and/or
bit may be damaged
When driving wood screws, predrill pilot
holes to make driving easier and to pre-
vent splitting of the workpiece. See the
chart.
4
8 13/16")
3 1 - 3
4
1118''
-
9/M"l
*If the tool is operated continuously until the battery cartridge has discharged, allow the
tool to rest for 15 minutes before proceeding with a fresh battery.
13