Alien Aircraft AG-504 Manual de inicio rápido - Página 5

Navegue en línea o descargue pdf Manual de inicio rápido para Juguete Alien Aircraft AG-504. Alien Aircraft AG-504 6 páginas.

12E...Test fit the motor into the motor mount assembly. Now

remove the motor.

Now continue with the regular FunMaster instructions, with the following changes.

Step 23...The new electric motor mount assembly is used in place of the kit firewall.

Step 28...The fuel tank tray is now the battery tray. After assembly, glue velcro on top of F-16.

Step 145...You do not need the throttle servo.

Steps 150 through 154 are not used.

Instead,

A...Mount the motor on the motor mount.

B...Mount the Arming Switch.

C...Mount the electronic speed control. It can be placed next to the fuel tank, under the fuel tank or on the front of

the firewall under the motor depending on how your model balances.

Warning!!!

Do not mount the propeller until you have completely finished the model and thoroughly tested the radio system and

electric power system.

Now finish the model using the regular FunMaster instructions.

...WITH THE PROPELLER REMOVED...Turn the transmitter on. Place the throttle stick in the low position. Plug

the battery into the speed controller. Check the motor for proper operation and direction of rotation. Follow the

instructions with the speed controller to make any adjustments.

D...Check the servos for proper operation and direction. Adjust the control throws to the values shown on the plan.

Now disconnect the battery and then turn off the transmitter.

Page 5