AlienTek DP100 Manual del usuario - Página 15

Navegue en línea o descargue pdf Manual del usuario para Generador portátil AlienTek DP100. AlienTek DP100 18 páginas. Digital power

5.3.2 Instructions

① Click Firmware Update options, the firmware update window will pop up;

② Select the remote mode, then ATK-DP100 will automatically load the latest firmware through

the network;

③ Click to start the upgrade button. Start firmware upgrading when the firmware matches. If the

current software version of the device is the same as the software to be upgraded, it will prompt to

cancel or force upgrading, and you can choose one of them.

④ Firmware update log, detailing the updated content

Notes:

① If using the local mode, You needs to download the latest firmware (.atk file, the download address is in

Chapter 7 of this document) from the download link we provided.

② If the upgrade process crashes, first unplug the Type-C power supply and the A-A USB cable of DP100, then

press and hold the left button, insert the A-A USB cable and then release the button, DP100 is forced Enter the

BOOT mode, and finally connect to ATK-DP100 to perform the firmware upgrade operation.

ATK-DP100 software will also be updated from time to time. Click on the software update

option to view the latest software version and software update content through the log.

If necessary, click "Download the latest version to the local" to download (requires internet

connection), as shown in Figure 5.4.1:

User Manual

DP100 Digital Power User Manual

Figure 5.3.1 Remote firmware upgrade

High Performance Digital Power