A&S 2.1 Bar with Wireless Subwoofer 300 Manual del usuario - Página 14

Navegue en línea o descargue pdf Manual del usuario para Subwoofer A&S 2.1 Bar with Wireless Subwoofer 300. A&S 2.1 Bar with Wireless Subwoofer 300 16 páginas.

Imprimir página

1. Pairing the Wireless Subwoofer with the Soundbar

If you cannot find the soundbar, press and hold the

remote control. The system has entered pairing mode. The unit' Blue indicator will flash rapidly

and prompt "Pairing".

3 Select "A&S Bar 300" enter "0000" for the password if necessary. The unit will voice "Paired" and

the Blue indicator will light up solidly.

4 Play music from the connected Bluetooth device.

To disconnect the Bluetooth function, you can :

Switch to another function on the unit.

Disable the function from your Bluetooth device.The Bluetooth device will be disconnected from

the unit after the "Disconnected" voice prompt.

Press and hold the

Tips:

Enter "0000" for the password if necessary.

If no other Bluetooth device pairs with this player within two minutes, the player will recover its

previous connection.

The player will also be disconnected when your device is moved beyond the operational range.

If you want to reconnect your device to this player, place it within the operational range.

If the device is moved beyond the operational range, when it is brought back, please check if the

device is still connected to the player.

If the connection is lost, follow the instructions above to pair your device to the player again.

Listen to Music from Bluetooth Device

If the connected Bluetooth device supports Advanced Audio Distribution Profile (A2DP), you can

listen to the music stored on the device through the player.

If the device also supports Audio Video Remote Control Profile (AVRCP), you can use the player's

remote control to play music stored on the device.

1. Pair your device with the player.

2. Play music via your device (if it supports A2DP).

3. Use supplied remote control to control play (if it supports AVRCP).

- To pause/resume play, press the

- To skip to a track, press the

Troubleshooting

To keep the warranty valid, never try to repair the system yourself. If you encounter problems when

using this unit, check the following points before requesting service.

• No power

Ensure that the AC cord of the apparatus is properly connected .

Ensure that there is power at the AC outlet.

Press standby button to turn the unit on.

• Remote control does not work

Before you press any playback control button, first select the correct source.

Reduce the distance between the remote control and the unit.

Insert the battery with its polarities (+/-) aligned as indicated.

Replace the battery.

Aim the remote control directly at the sensor on the front of the unit.

/ PAIR button on the unit or on the remote control.

buttons on the remote control.

/ PAIR button on the unit or on the

/PAIR button on the remote control or on the unit.