Align PTT6 Manual de instrucciones - Página 5
Navegue en línea o descargue pdf Manual de instrucciones para Equipamiento industrial Align PTT6. Align PTT6 14 páginas. 100,000 lbs. capacity battery powered tugger
Imprimir páginaPTT6 Power Tugger
5
II. Safety
PTT6 Safety
Charge the batteries after using the PTT6 Tugger.
Always place the female coupling (1a) at the correct
height. It's important that the coupling is at the correct
angle and is firmly fastened to your trailer.
Raise / lift the coupling until the casters have enough
ground clearance (1.5").
Only lift the coupling high enough to perform the transport.
Load Placement
The image below shows the correct setup that should be used with the PTT6, as well as where to
place the load. These trailers should consist of one wheel axle. When the trailer and the PTT6's cou-
pling are attached to each other, and the PTT6's arm is raised, the trailer leg will be lifted off
the ground.
As mentioned above, trailers should consist of one wheel axle. If there are two axles and the floor is
uneven, the front wheel will be lifted up by the PTT6 and overload the wheels. Uneven floors put the
trailer coupling at risk of unfastening and can disconnect from the trailer.