Garmin 010-02235-02 Manual del usuario - Página 20
Navegue en línea o descargue pdf Manual del usuario para GPS Garmin 010-02235-02. Garmin 010-02235-02 26 páginas.
Imprimir página• To never turn on expedition mode, select Never.
In expedition mode, the green LED flashes occasionally.
Long-Term Storage
When you do not plan to use the device for several months, you
should charge the battery to at least 50% before you store the
device. You should store the device in a cool, dry place with
temperatures around the typical household level. After storage,
you should fully recharge the device before using it.
Attaching the Carabiner Clip
1
Position the carabiner clip
spine
of the device.
2
Slide the carabiner clip up until it locks in place.
Removing the Carabiner Clip
Lift up on the bottom of the carabiner clip, and slide the
carabiner clip off the mounting spine.
Attaching a Lanyard
1
Insert the loop of the lanyard through the slot in the device.
2
Thread the other end of the lanyard through the loop, and pull
it tight.
3
If necessary, attach the lanyard to your clothing or backpack
to tether it during an activity.
Device Care
Avoid chemical cleaners, solvents, and insect repellents that can
damage plastic components and finishes.
Do not store the device where prolonged exposure to extreme
temperatures can occur, because it can cause permanent
damage.
The device is water resistant to IEC Standard 60529 IPX7. It can
withstand accidental immersion in 1 meter of water for 30
minutes. Prolonged submersion can cause damage to the
device. After submersion, be certain to wipe dry and air dry the
device before using or charging.
Thoroughly rinse the device with fresh water after exposure to
chlorinated or salt water environments.
Cleaning the Device
1
Wipe the device using a cloth dampened with a mild
detergent solution.
2
Wipe it dry.
After cleaning, allow the device to dry completely.
16
in the slots on the mounting
NOTICE
Data Management
NOTE: The device is not compatible with Windows
Windows NT
®
, and Mac
®
OS 10.3 and earlier.
File Types
The handheld device supports these file types:
• Files from Garmin Explore.
• GPX route, track, and waypoint files.
• GPX geocache files
(Downloading Geocaches Using a
Computer, page
10).
• JPEG photo files.
• GPI custom POI files from the Garmin POI Loader. Go to
www.garmin.com/products/poiloader.
• FIT files for exporting to Garmin Connect.
Installing a Memory Card
You can install a microSD memory card for additional storage or
pre-loaded maps. The device supports memory cards up to
32 GB. For optimal performance, use a class 10 memory card.
1
Lift the weather cap on the side of the device
2
Insert the memory card with the gold contacts facing the
device screen.
Connecting the Device to Your Computer
To prevent corrosion, thoroughly dry the USB port, the weather
cap, and the surrounding area before charging or connecting to
a computer.
1
Pull up the weather cap from the USB port.
2
Plug the small end of the USB cable into the USB port on the
device.
3
Plug the large end of the USB cable into a computer USB
port.
Your device and memory card (optional) appear as
removable drives in My Computer on Windows computers
and as mounted volumes on Mac computers.
Transferring Files to Your Device
1
Connect the device to your computer.
On Windows computers, the device appears as a removable
drive or a portable device, and the memory card may appear
as a second removable drive. On Mac computers, the device
and memory card appear as mounted volumes.
NOTE: Some computers with multiple network drives may not
display device drives properly. See your operating system
documentation to learn how to map the drive.
2
On your computer, open the file browser.
3
Select a file.
4
Select Edit > Copy.
95, 98, Me,
®
.
NOTICE
Device Information