AEG 949496339 Manual del usuario - Página 27

Navegue en línea o descargue pdf Manual del usuario para Horno AEG 949496339. AEG 949496339 32 páginas.

Imprimir página

Step 6

Pull the door trim to the front to re‐

move it.

Step 7

Hold the door glass panel by its top

edge and carefully pull it out. Make

sure the glass slides out of the

supports completely.

Step 8

Clean the glass panels with water

and soap. Dry the glass panels

carefully. Do not clean the glass

panels in the dishwasher.

Step 9

After cleaning, install the glass

panel and the oven door.

The screen-printing zone must face the in‐

ner side of the door. Make sure that after

the installation the surface of the glass

panel frame on the screen-printing zones

is not rough when you touch it.

When installed correctly the door trim

clicks.

Make sure that you install the internal

glass panel in the seats correctly.

12.5 How to replace: Lamp

WARNING!

Risk of electric shock.

The lamp can be hot.

Step 1

Turn off the oven. Wait until

the oven is cold.

Back lamp

Step 1

Turn the glass cover to remove it.

Step 2

Clean the glass cover.

Step 3

Replace the lamp with a suitable 300 °C heat-resistant lamp.

Always hold the halogen lamp with a

cloth to prevent grease residue from

burning on the lamp.

Before you replace the lamp:

Step 2

Disconnect the oven from

the mains.

Step 3

Put a cloth on the bottom of

the cavity.

ENGLISH