AEG BE4003001 Manual del usuario - Página 25

Navegue en línea o descargue pdf Manual del usuario para Horno AEG BE4003001. AEG BE4003001 32 páginas. Aeg be2003021 oven
También para AEG BE4003001: Manual del usuario (24 páginas), Manual del usuario (28 páginas), Manual del usuario (32 páginas), Manual del usuario (32 páginas)

Removing the shelf support

1. Pull the front of the shelf support away

from the side wall.

2. Pull the shelf support from the back of

the side wall to remove it.

To install the shelf support follow the proce-

dure in reverse.

Valid with telescopic runners:

The retaining pins on the telescopic shelf run-

ners must point to the front!

Oven Ceiling

You can fold down the heating element on the oven ceiling to clean the oven ceiling easily.

WARNING!

Before you fold down the heating element deactivate the appliance. Make sure that the

appliance is cold. There is a risk of burns!

Folding down the heating element

1. Remove the shelf support.

2. Hold the heating element with the two

hands at the front

3. Pull it forwards against the spring pres-

sure and out along the support on both

sides.

4. The heating element folds down.

The oven ceiling is ready to clean.

Installing the heating element

1. Install the heating element in opposite se-

quence.

Install the heating element correctly on the two sides above the support on the inner wall

of the appliance.

2. Install shelf support.

Care and cleaning