Garmin Zumo 200 Series Manual de inicio rápido - Página 5
Navegue en línea o descargue pdf Manual de inicio rápido para GPS Garmin Zumo 200 Series. Garmin Zumo 200 Series 13 páginas. Zumo 200 series
También para Garmin Zumo 200 Series: Manual de inicio rápido (13 páginas), Manual de instrucciones de instalación (46 páginas)
Imprimir página
Step 1: Connect Power to the
zūmo
Select a suitable and secure location to
mount the zūmo on your motorcycle, based
on available power sources and safe cable
routing.
Step 2: Install the Handlebar
Base
The zūmo includes parts for two handlebar
installation solutions. Custom mounts can
require additional hardware
mount.com).
A) To install the U-bolt and handlebar
base:
1. Place the U-bolt around the handlebar,
and thread the ends through the
handlebar base.
2. Tighten the nuts to secure the base. Do
not overtighten.
NOTE: The recommended torque is 50 lbf-
in. Do not exceed torque of 80 lbf-in.
(www.ram-
Handlebar
B) To install the handlebar base to the
clutch/brake clamp bracket:
NOTE: Both 1/4 in. standard and M6 bolts
are included. Match the size of the factory
bolts on your clutch/brake clamp bracket.
1. Remove the two factory bolts on your
clutch/brake clamp bracket.
2. Thread the new bolts through the
handlebar base, spacers, and clamp
bracket.
3. Tighten the bolts to secure the base.
Handlebar
base
Handlebar
base
U-bolt
Clutch/brake
clamp bracket
Spacers