Garmin zumo 300 Series Manual del usuario - Página 20
Navegue en línea o descargue pdf Manual del usuario para GPS Garmin zumo 300 Series. Garmin zumo 300 Series 24 páginas. Declaration of conformity
También para Garmin zumo 300 Series: Manual del usuario (24 páginas), Manual de inicio rápido (4 páginas), Manual de instrucciones de instalación (46 páginas), (francés) Declaration De Conformite (5 páginas)
Imprimir página
About nüMaps Lifetime
Models with "LM" after the model number include subscriptions
to nüMaps Lifetime, which provides quarterly map updates for
the life of your device. For terms and conditions, go to
http://www.garmin.com/numapslifetime.
NOTE: If your device does not include a subscription to nüMaps
Lifetime, you can purchase one at
/numapslifetime.
Purchasing Additional Maps
1
Go to your device product page on the Garmin web site
(http://www.garmin.com).
2
Click the Maps tab.
3
Follow the on-screen instructions.
Safety Cameras
Garmin is not responsible for the accuracy of or the
consequences of using a custom point of interest or a safety
camera database.
Safety camera information is available in some locations. Check
http://my.garmin.com
for availability. For these locations, you
can purchase a subscription for safety camera information. The
subscription includes the locations of hundreds of safety
cameras. Your device alerts you when you are approaching a
safety camera and can warn you if you are driving too fast. The
data is updated at least weekly, so you can update your device
regularly to receive the most up-to-date information.
You can purchase a new region or extend an existing
subscription at any time. Each region that you purchase has an
expiration date.
Custom Points of Interest
Custom POIs are customized points on the map. They can
contain alerts that let you know if you are near a designated
point or if you are traveling faster than a specified speed.
Installing POI Loader Software
You can create or download custom POI lists on your computer
and install them on your device using POI Loader software.
1
Go to http://www.garmin.com/extras.
2
Click Services > POI Loader.
3
Install the POI Loader onto your computer.
Using the POI Loader Help Files
For more information on the POI loader, refer to the Help file.
With the POI loader open, click Help.
Finding Extras
1
Select Where To? > Categories > Custom POIs.
2
Select a category.
Purchasing Accessories
Go to http://buy.garmin.com.
Troubleshooting
Problem
Solution
My device is not
• Verify the GPS simulator is turned off
acquiring satellite
(page
signals.
• Take your device out of parking garages and
away from tall buildings and trees.
• Remain stationary for several minutes.
16
http://www.garmin.com
NOTICE
14).
Problem
Solution
The suction cup will
1
Clean the suction cup and windshield with
not stay on my
rubbing alcohol.
windshield.
2
Dry with a clean, dry cloth.
3
Mount the suction cup
The device does not
• Check the fuse in the vehicle power cable
charge in my vehicle.
(page
• Verify the vehicle is turned on and is
supplying power to the power outlet.
• Your device can only charge between 32°F
and 113°F (between 0°C and 45°C).
My battery does not
To maximize the time between charges, turn
stay charged for very
down the backlight
long.
My battery gauge
Allow the unit to fully discharge, and fully
does not seem
charge it (without interrupting the charge cycle).
accurate.
How do I know my
When your device is in USB mass storage
device is in USB
mode, a picture of a device connected to a
mass storage mode?
computer is shown on the device screen.
1
The device is
Disconnect the USB cable from your
connected to the
computer.
computer, but it will
2
Turn off the device.
not go into mass
3
Plug the USB cable into a USB port on your
storage mode.
computer and into your device.
The device automatically turns on and goes
into USB mass storage mode.
4
Verify your device is connected to a USB port
and not a USB hub.
I cannot see any new
If you have several network drives mapped on
removable drives in
your computer, Windows can have trouble
my list of drives.
assigning drive letters to your device drives.
Refer to your operating system Help file to learn
how to map or assign drive letters.
My phone will not
• From the main menu, select Settings >
connect to the
Bluetooth. The Bluetooth field must be set to
device.
Enabled.
• Turn on your phone and bring it within 33 feet
(10 m) of the device.
• Go to
more help.
(page
2).
15).
(page
14).
http://www.garmin.com/bluetooth
for
Appendix