Garmin Zumo 396 Manual del usuario - Página 7
Navegue en línea o descargue pdf Manual del usuario para GPS Garmin Zumo 396. Garmin Zumo 396 32 páginas.
También para Garmin Zumo 396: Manual del usuario (32 páginas), Manual de instrucciones de instalación (46 páginas)
Imprimir página
8
Plug the other end of the automotive power cable into a
power outlet.
Getting started
See the Important safety and product information guide in the
product box for product warnings and other important
information.
• Update the maps and software on your device
updates, page
22).
• Mount the device and connect it to power.
• Pair your Bluetooth
phone and headset
®
and Headset, page
14) (optional).
• Acquire GPS signals
(Acquiring GPS signals, page
• Adjust the screen brightness
brightness, page
3).
• Navigate to your destination
Device Overview
power key
microSD
®
memory card slot
USB power and data port
Turning the device on or off
• To turn the device on, press the power key or connect the
device to power.
• To put the device in power saving mode, press the power key
while the device is on.
While in power saving mode, the screen is off and the device
uses very little power, but it can wake instantly for use.
TIP: you can charge your device faster by putting it in power
saving mode while charging the battery.
• To turn off the device completely, hold the power key until a
prompt appears on the screen, and select Off.
The prompt appears after five seconds. If you release the
power key before the prompt appears, the device enters
power saving mode.
Acquiring GPS signals
When you turn on your navigation device, the GPS receiver
must collect satellite data and establish the current location. The
time required to acquire satellite signals varies based on several
factors, including how far you are from the location where you
last used your navigation device, whether you have a clear view
of the sky, and how long it has been since you last used your
navigation device. The first time you turn on your navigation
device, it may take several minutes to acquire satellite signals.
1
Turn on the device.
2
Wait while the device locates satellites.
Getting started
WARNING
(Product
(Pairing Your Phone
3).
(Adjusting the screen
(Starting a route, page
5).
3
If necessary, go to an open area away from tall buildings and
trees.
in the status bar indicates the satellite signal strength. When
at least half of the bars are filled, the device is ready for
navigation.
Status bar icons
The status bar is located at the top of the main menu. The status
bar icons display information about features on the device. You
can select some icons to change settings or view additional
information.
GPS signal status. Hold to view GPS accuracy and acquired
satellite information
(Viewing GPS signal status, page
Bluetooth technology status. Select to view the Bluetooth
settings
(Bluetooth settings, page
Wi-Fi signal strength. Select to change the Wi-Fi settings
‑ Fi
(Wi
®
settings, page
Connected to hands-free calling. Select to place a phone call
(Hands-free calling, page
Active transportation mode. Select to change the transportation
mode.
Current time. Select to set the time
page
21).
Battery charge level.
Sharing LiveTrack data. The number of invited viewers appears
on the icon. Select to open the LiveTrack app
page
18).
Smartphone Link status. Select to connect to the Smartphone
Link app and receive live traffic data and other live services
(Pairing with your phone and connecting to Smartphone Link,
page
13). When the icon is blue, the device is connected to
the Smartphone Link app.
Temperature. Select to view the weather forecast
weather forecast, page
Fuel status. Select to view fuel tracking information
tracking, page
8).
Using the on-screen buttons
On-screen buttons allow you to navigate the pages, menus and
menu options on your device.
• Select
to return to the previous menu screen.
• Hold
to quickly return to the main menu.
• Select
or
to scroll through lists or menus.
• Hold
or
to scroll faster.
• Select
to see a context-based menu of options for the
current screen.
Adjusting the volume
1
Select Volume.
2
Select an option:
• Use the slider bar to adjust the volume.
• Select
to mute the device.
• Select
for additional options.
Using the audio mixer
You can use the audio mixer to set the volume levels for
different audio types, such as navigation prompts or phone calls.
The level for each audio type is a percentage of the master
volume.
1
Select Volume.
2
Select
> Audio Mixer.
3
Use the sliders to adjust the volume for each audio type.
Adjusting the screen brightness
1
Select Settings > Display > Brightness.
20).
20).
15).
(Setting the Time,
(LiveTrack,
(Viewing the
19).
(Fuel
25).
3