Garmin ZUMO 396 LMT-S Europe Manual del usuario - Página 12
Navegue en línea o descargue pdf Manual del usuario para GPS Garmin ZUMO 396 LMT-S Europe. Garmin ZUMO 396 LMT-S Europe 32 páginas.
Imprimir página
• To delete one custom avoidance, select the avoidance
and select
> Delete.
Navigating off road
If you are not following roadways as you navigate, you can use
Off Road mode.
1
Select Settings > Navigation.
2
Select Calculation Mode > Off Road > Save.
The next route will be calculated as a straight line to the
location.
Fuel tracking
You can set your device to estimate your fuel usage, warn you
when you approach the maximum estimated fuel distance, and
suggest fuel stops based on your estimated fuel range. When
fuel tracking is enabled,
White: fuel tracking is disabled, or the device is not connected
to the motorcycle mount.
Green: the estimated fuel range is above the fuel tank warning
level.
Orange: the estimated fuel range is below the fuel tank warning
level.
Red: the estimated distance remaining on the tank is 0.
Enabling fuel tracking
Before you can enable fuel tracking, the device must be in
motorcycle mode or off road mode and placed in the motorcycle
mount.
When you enable fuel tracking, a fuel gauge appears on the trip
computer
(Viewing the trip information page, page
1
Fill your fuel tank.
2
Select Apps > Fuel Settings > Fuel Tracking.
3
Select Distance Per Tank.
4
Enter the distance the vehicle travels on a tank of fuel and
select Done.
Setting a low-fuel warning
You can set the device to warn you when the tank is low on fuel.
NOTE: the device must be connected to the motorcycle mount
to give low-fuel warnings.
1
Enable fuel tracking
(Enabling fuel tracking, page
2
Select Remaining Fuel Warning.
3
Enter a distance and select Done.
When you have only enough fuel left to travel the distance you
entered, a low-fuel warning appears on the map page.
Resetting the Fuel Tank Mileage
When you refill your fuel tank, you should reset the fuel tank
mileage on your device to more accurately track your remaining
fuel.
Select Apps > Fuel Settings > Reset Fuel Tank.
Enabling dynamic fuel stops
Before you can enable dynamic fuel stops, the device must be in
motorcycle mode, placed in the motorcycle mount and fuel
tracking must be enabled.
You can set the device to suggest fuel stops based on your
estimated fuel range.
Select Apps > Fuel Settings > Dynamic Fuel Stops.
Finding and saving locations
The maps loaded in your device contain locations, such as
restaurants, hotels, vehicle services, and detailed street
information. The Where To? menu helps you find your
8
indicates the current fuel status.
12).
8).
destination by providing several methods to browse, search, and
save this information.
• Enter search terms to quickly search all location information
(Finding a location using the search bar, page
• Browse or search pre-loaded points of interest by category
(Points of Interest, page
• Search and check into Foursquare
(Searching Foursquare points of interest, page
• Use search tools to find specific locations, such as
addresses, junctions, or geographic coordinates
tools, page
10).
• Search near a different town or area
area, page
9).
• Save your favourite locations to find them quickly in the future
(Saving Locations, page
• Return to recently found locations
page
10).
Points of Interest
A point of interest is a place that you may find useful or
interesting. Points of interest are organised by category and can
include popular travel destinations such as petrol stations,
restaurants, hotels, and entertainment venues.
Finding a location using the search bar
You can use the search bar to search for locations by entering a
category, brand name, address or town name.
1
Select Where To?.
2
Select Enter Search in the search bar.
3
Enter all or part of the search term.
Suggested search terms appear below the search bar.
4
Select an option:
• To search for a type of business, enter a category name
(for example, "cinemas").
• To search for a business name, enter all or part of the
name.
• To search for an address near you, enter the house
number and street name.
• To search for an address in another town, enter the house
number, street name, town and county.
• To search for a town, enter the town and county.
• To search for coordinates, enter latitude and longitude
coordinates.
5
Select an option:
• To search using a suggested search term, select the term.
• To search using the text you entered, select
6
If necessary, select a location.
Finding a location by category
1
Select Where To?.
2
Select a category or select Categories.
3
If necessary, select a subcategory.
4
Select a location.
Searching within a category
After you have performed a search for a point of interest, certain
categories may display a Quick Search list that shows the last
four destinations you selected.
1
Select Where To? > Categories.
2
Select a category.
8).
8).
points of interest
®
10).
(Search
(Changing the search
11).
(Viewing history,
.
Finding and saving locations