Appendix
Maximizing the Battery Life
•
Turn down the backlight
(Tools
Settings
Display
> Brightness).
>
•
Disable Bluetooth. See
page 14.
•
Do not leave your zūmo in direct
sunlight. Avoid prolonged exposure to
excessive heat.
Changing the Fuse
NOTICe
When replacing the fuse, do not lose any of the small
pieces, and ensure they are put back in the proper
place.
If your unit does not charge in your vehicle,
you may need to replace the fuse located at
the tip of the automotive adapter.
1. Unscrew the black, round
end piece, and remove it.
2. Remove the fuse (glass
and silver cylinder), and
replace with a 3A fast‑
blow fuse.
2
3. Ensure that the silver tip is placed in the
black end piece. Screw on the black end
>
piece.
About GPS Satellite Signals
Your zūmo must acquire GPS (Global
Positioning System) satellite signals to
navigate. If you are indoors, near tall
buildings or trees, or in a parking garage,
your zūmo cannot acquire satellites. Go
outside to an area free from tall obstructions
to use your zūmo.
When your zūmo has acquired satellite
signals, the signal strength bars on the Menu
page are green
signals, the bars turn red or clear
For more information about GPS, go to
End
www.garmin.com/aboutGPS.
pece
Slver tp
Fuse
Removing the Road Tech
zūmo and Mounts
See the zūmo 660 Installation Instructions in the
product box for motorcycle and automobile mounting
instructions.
To remove the zūmo from the cradle on both
the suction cup and motorcyle mounts, press
the button on the side of the cradle, and tilt
the zūmo forward. Place the weather cap on
the motorcyle mount cradle.
To remove the cradle from the suction cup
mount, turn the cradle to the right or the left.
Apply pressure until the socket on the cradle
. When it loses satellite
releases the ball on the mount.
.
The permanent mounting adhesive is extremely
difficult to remove after it is installed.
NOTe
NOTICe
Road Tech
zūmo 660 Owner's Manual
™
™
Imprimir página